Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ahcpd_0.53-r3_aarch64_cortex-a76.ipk
Size: 24182
SHA256sum: 0437c8ff656640f5409974d14a48ae0bdef64bce2bad53bb6a48da5ce7cfef0d
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: alfred_2024.3-r1_aarch64_cortex-a76.ipk
Size: 28870
SHA256sum: 3cce8beda1f24e2e0a170cfbfa2573eb07c5c7b21bbafdd0f777159a11164cc7
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_aarch64_cortex-a76.ipk
Size: 4929
SHA256sum: baa7b440bde8221ea2518d1352c76dcd865626caac01f5ee6d26f05be7b96b0d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: aarch64_cortex-a76
Installed-Size: 153600
Filename: babeld_1.13.1-r2_aarch64_cortex-a76.ipk
Size: 69284
SHA256sum: 0435946eb88da2ee8c20fad429c6556aa404e587ebfc1293cf24a3652658a6fc
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_aarch64_cortex-a76.ipk
Size: 47222
SHA256sum: 5b27d7a6e2f27fc4de3604d75aa6cecdf92042b637a4d883a5730ffc862f5e31
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_aarch64_cortex-a76.ipk
Size: 54245
SHA256sum: a5fe479e1888969370e8a2c2ce765ad88fe60c4e7d424eb5eab900bc158d409c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_aarch64_cortex-a76.ipk
Size: 16923
SHA256sum: 323ddc98b108b4123d6ab8cac550085537d11695cd01d03d25c77583a01bb5f7
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: batmand_1440-r1_aarch64_cortex-a76.ipk
Size: 45849
SHA256sum: b16e10131a8a04e4ab0f60aa5b88721c5a887589c099a3425e584d3f7fdd281e
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 1136640
Filename: bird2_2.16-r1_aarch64_cortex-a76.ipk
Size: 422725
SHA256sum: 5d864064480dba81890848772210d6cc9018dc8e5c0aee370f157733f89afb3b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2c_2.16-r1_aarch64_cortex-a76.ipk
Size: 11673
SHA256sum: 5ae25371dcd94eafe39dcef1254c3c3740677b10a03a06828f15268d00982819
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bird2cl_2.16-r1_aarch64_cortex-a76.ipk
Size: 10565
SHA256sum: f5478fa10b80dc04837f8e303785e54b870ee8ab81fec9370821c7eeec6387b0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 5002
SHA256sum: 78071b4d8f214af7aff1dd0cc4b1dc0e269591aceb5147b6f3fb295f89ea9a4f
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 8970
SHA256sum: e62e02bda3ae40631e8423b9425ab9ab01db2691c289f75f519b1f7004ede191
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6556
SHA256sum: 01ad4ccf22570191e95a06d3764cdd514766734647437770e8d6b31a314e76f8
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 10975
SHA256sum: c5b3a383b8f431b55edd8975c7ec4d1291af265d4db0bf451f0596e4243e3cac
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 6009
SHA256sum: 876f5c33fbf0d36bff9d05fcf9c358392484aa5c802e90d1dbdcbe3500c553a8
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 27624
SHA256sum: 4d61645eb4ba481061ca8252e718e501464e5d305f0783a2cc56a6f8d4de6cc1
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 9613
SHA256sum: a769daefa217b0c2b5534612539650d89a7c731c3e569196c2895898a4c3e648
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: aarch64_cortex-a76
Installed-Size: 430080
Filename: bmx7_r2024061001-r1_aarch64_cortex-a76.ipk
Size: 178513
SHA256sum: 6459bdeb31198b14ed578cb11780df9f4a51801d6c72fb005ea54e8f17c85eff
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 768000
Filename: cjdns-tests_21.1-r6_aarch64_cortex-a76.ipk
Size: 342517
SHA256sum: 88ba62338e02dc29769c9f0c93fb16151fd473ba2fbfdbe581a28d4514fd65c8
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 993280
Filename: cjdns_21.1-r6_aarch64_cortex-a76.ipk
Size: 404263
SHA256sum: 107fb90608435b4d0e6aed49f689142ae4daa571dcf1a6b0f7dac6e632c8d8eb
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 1424
SHA256sum: 2bbea98884bb1508cfe61940a1828394c743dff4a4960746edcf7fd5b54e9e79
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 960
SHA256sum: bcee7bd6843fb1d5907eb2ff474f6238830bb6d3f2287bbf0e7f83b350ed7e23
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 945
SHA256sum: 116a50f0ad0312ebbc01b912004ca9dba0fc135b403592886481afa1f4ecd7bb
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-nossl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 103989
SHA256sum: 60286b3496ee2856b3b000963c9af2ac2bd1cb0d340506f8706d98ae6b78c636
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: aarch64_cortex-a76
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 114856
SHA256sum: b927dd617e750983a0e4dfa1fd2d56354af2adb5ff2507d68c40d28fcce6c82f
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: aarch64_cortex-a76
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_aarch64_cortex-a76.ipk
Size: 6588
SHA256sum: 1ece5222abb7cf35f42c4d24607b0d123bef08765fa6b7ac645403b6a1a87d58
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk
Size: 57623
SHA256sum: 5ed322e5d4783263a52bd10e563b23df7d94b4373568af9bf998b2bf5dd8814e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7785
SHA256sum: 16b03637b1e3915684ff4e26874360134921cd712d761bdeb1bbda8d0babb7e2
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25668
SHA256sum: 6b20ff99ae696c0bf2bfb653e552ab5273878fa733d6205894466ae5e1536150
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_aarch64_cortex-a76.ipk
Size: 7919
SHA256sum: 4b4c5fa3fbb4bbc802c8a24141d732d579486793c5be3fd3fbb6f4f8553f5cf0
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: d5f0d90fa526db14cb5c78265a2062aa2746281b982052a3c111a33ad2b33201
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_aarch64_cortex-a76.ipk
Size: 33795
SHA256sum: 028f3cb7542c4980e71789e64a9c45dd08302a39305b56f7ebcccfdfcbaddd76
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: aarch64_cortex-a76
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_aarch64_cortex-a76.ipk
Size: 50634
SHA256sum: 849d7d3915af280db5a32bc746ef442ef81a4b24e024ee73cf8f4626fc41a0f5
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 12320
SHA256sum: 57b675207eb9561ab296bc749a422517c74ccb1db6e16b7c3f40196f2b3610c5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2942
SHA256sum: 678a71ecc6827ca7378f1056e071baae4e807cce94b5989dbc4471ae6ba455b5
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14295
SHA256sum: da7217539397e4465dbf1bad7f6c11fecef70e799a1ccfafc8d351017955dcd3
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 4887
SHA256sum: 998c286ae622e0968a159c9d51c543f2c6455e7bbc62cfc067ed0bb0f1eed8e2
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3375
SHA256sum: 0b322fe21599e25bbc10f13fc95d080d0a1e945885db586aadbe7eeb1ad3b439
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5279
SHA256sum: 481d0db3182179a4dffc276d230d76242c23cd45ed21cdd984f8a02468dd982f
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3659
SHA256sum: 5761fff7174f019052921564fbd0429467b530276697757476e9f921609dfc77
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 31773
SHA256sum: cf29003e4750a5a54c4e4a9fabbfa39d9136aa8d0e015a2cecf4d559a9b61033
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 24211
SHA256sum: d395677fc815ba9fd81aa07ad98eeffb75015dbca5682b429e6a4714728ec5d1
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10915
SHA256sum: ed2c714a90d790990cc8641098e9438b98dda4c40e3fad4e9d0791075ec44693
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 13321
SHA256sum: 48c8402c135224a5d2e8075cfe600ca82a521d40c9bd7f59dc55841dd0c2e024
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 14988
SHA256sum: 22bff4b6c02db94ad3148b9e7b8bad7452ccb1a7487e58ffba38d0e6c6b3ac21
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 10570
SHA256sum: 93c11190f4ecb7178bfd23218c5cfe3b21822ed591e31f49480832ccb1f0941c
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 3928
SHA256sum: f0686fe790beddf48326948d66c17421bccfac277c51353b1a7c00963789d260
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 63360
SHA256sum: 58ff2d9e9b8e5d36251ea5f1248103d581a6e6bdb7203d676ca1e18454f27dca
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 7791
SHA256sum: 8f127339cd000e46c36f07dc637f723bebb55df4d4f14d5732d459c2ed8e07ce
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 11791
SHA256sum: 5c987c6350f152d7b43c03b38c91d4b98a4006706a12700f10da15d91cd0f5e9
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 5775
SHA256sum: e8b886915a1faccc2f14dd549b68c79dfdfe2fe5d30004553d1f116eab65287d
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 16495
SHA256sum: e71c5083d683fb297ddd320e624a0063702591b78f56326360df7f5c99a6c412
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 2569
SHA256sum: 2c78c0f21cd3db89552ef129cdbb44332dc50d02cab891e14693e73e0e444941
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 1955
SHA256sum: 31c94a377b6e253d06547e9636b23cb6ef666fc3dfcc90e2e4c5c3a241d59025
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_aarch64_cortex-a76.ipk
Size: 146152
SHA256sum: 094a55897a3e98f4fdb9ec00e746230006118cc3e117dd5c588b85d8731cdf21
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 182584
SHA256sum: 1a626acb44af1b463556816762673b761b9e8c9caf64d2c49333e1df0165c5c6
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk
Size: 177891
SHA256sum: 59482ec57efc0c66548bab49f303c184ea48ebfc717fcbdf73331575c0df7d1b
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_aarch64_cortex-a76.ipk
Size: 2306
SHA256sum: 9eacfa885d7ed9fbc0120e0bc787cdecb611a70457d616022f17a703ddd17918
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: aarch64_cortex-a76
Installed-Size: 655360
Filename: oonf-olsrd2_2022.08.25~1cec9b21_aarch64_cortex-a76.ipk
Size: 261603
SHA256sum: 89c656825e398b71e8734c1366ceedbe5ca398481aae258fced4426da86a6854
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: aarch64_cortex-a76
Installed-Size: 634880
Filename: opennds_10.3.0-r1_aarch64_cortex-a76.ipk
Size: 165308
SHA256sum: 431b1161f63cbb88cd06e5e25bed915133336a712487fe11c44b564e8397c150
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: aarch64_cortex-a76
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_aarch64_cortex-a76.ipk
Size: 88271
SHA256sum: 38868fb4bf43d91dd64fc0ae9762b15a02090ca86108da0778e05de8e46375f6
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: aarch64_cortex-a76
Installed-Size: 215040
Filename: prince_0.4-r3_aarch64_cortex-a76.ipk
Size: 37942
SHA256sum: a61f0da8f1f1ac752afbc6e1da51ee78d1a5c73164495b7a4dd5a599c088d191
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: aarch64_cortex-a76
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_aarch64_cortex-a76.ipk
Size: 12084
SHA256sum: dc07e3de6a08ae35b948ffdbb3e7a886b1fec56c2b82be9e476e24a1d6ffb860
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: aarch64_cortex-a76
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk
Size: 10048
SHA256sum: d5bf9b1d14ff67db126d1f56d0d5e0b15c988b555acde598a9a4e93c01f787d4
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.