Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 22361
Filename: ahcpd_0.53-3_x86_64.ipk
Size: 23244
SHA256sum: 0ad3a072c80f9c5a98e1dbb34c9072b73da2d742be254b6a1764ef0509e8a535
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2021.1-3
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: x86_64
Installed-Size: 23797
Filename: alfred_2021.1-3_x86_64.ipk
Size: 25004
SHA256sum: e4c8858596cdaaf2b1013409975284e85224772b272ac8b60e7f626d2c7bafd8
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: x86_64
Installed-Size: 3758
Filename: babel-pinger_0.1-1_x86_64.ipk
Size: 4554
SHA256sum: 1b1a7253f201adc0a1508e8d04fae0f18cb80e4d9bc0857864d9ccd6c0541b23
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.12.2-1
Depends: libc, libubus20210630, libubox20210516
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 68755
Filename: babeld_1.12.2-1_x86_64.ipk
Size: 69919
SHA256sum: 29879774a524cd18dbe8d900944c11af15ed012548a558cac4b97b562614ea14
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2021.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 45462
Filename: batctl-default_2021.1-2_x86_64.ipk
Size: 46474
SHA256sum: 379c26128e466d5752492bbd39ce8e3d78dddfffc7dd4d3823eb5bb005f9a1bb
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2021.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2021.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 52954
Filename: batctl-full_2021.1-2_x86_64.ipk
Size: 54023
SHA256sum: e86c667c092cbe32919ea5f0073e6281dc835383ef268a8e1cefdfcacdd345f4
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2021.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2021.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 15663
Filename: batctl-tiny_2021.1-2_x86_64.ipk
Size: 16622
SHA256sum: 1d8e9bca53dc2a8f6abaa8f20823c8b80fb37bae926f628f2d6df2293641823d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2021.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 44369
Filename: batmand_1440-1_x86_64.ipk
Size: 45234
SHA256sum: 7be6d3bd72bd9200c82893d411c2e7b5ef488d3ef2e2051e9a9c08b403e76865
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 6836
Filename: bird1-ipv4-uci_0.3-5_x86_64.ipk
Size: 7869
SHA256sum: bc7eb88a683bc4c021618b6d5aabe132a193420568c3503126f51caf255c4c95
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 221524
Filename: bird1-ipv4_1.6.8-2_x86_64.ipk
Size: 222815
SHA256sum: f7a11ab8815b104752ccc8f5512e87eeb295796178006c367eafef3a9d627c60
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 6004
Filename: bird1-ipv6-uci_0.3-5_x86_64.ipk
Size: 6972
SHA256sum: e206e8e41f894aa3d5a569354dc012706d426783ff33a118652b6fa89604400b
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 249128
Filename: bird1-ipv6_1.6.8-2_x86_64.ipk
Size: 250383
SHA256sum: e7c5083d10c1103da73421466b6c5fc5e95f1679adf44d786f0cc0adeec80ac6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 9068
Filename: bird1c-ipv4_1.6.8-2_x86_64.ipk
Size: 10307
SHA256sum: 236fd1b452b03121de0acbdaad70209613dd2f3a4b7132eabdb3af9d42d0854c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 9135
Filename: bird1c-ipv6_1.6.8-2_x86_64.ipk
Size: 10371
SHA256sum: b79f2ef0c69179b6451b6b44834e603048c16953a9e36c42a0598e166e485a28
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8394
Filename: bird1cl-ipv4_1.6.8-2_x86_64.ipk
Size: 9559
SHA256sum: 7747e151b7ffdd12b27fdfc7a436c7207bb13dd611ed6ecf3eab89d3948cf487
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8454
Filename: bird1cl-ipv6_1.6.8-2_x86_64.ipk
Size: 9617
SHA256sum: a90ade0ac5edc2c4a57cf8f110627ce9c662736dd9802bd617bb3c49de22b460
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.12-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 358011
Filename: bird2_2.0.12-1_x86_64.ipk
Size: 357941
SHA256sum: ec19654105f12d5ea18135fcff248b8bbcd682cec3a98c8834f5d7fbfe215be8
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.12-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 8895
Filename: bird2c_2.0.12-1_x86_64.ipk
Size: 10027
SHA256sum: 3bd8d84e4460dbabd4a970fe51f4f6b64b1b407339c652e6b008126b462d238d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.12-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 7649
Filename: bird2cl_2.0.12-1_x86_64.ipk
Size: 8721
SHA256sum: 1068cf7735dde2d6781551a059a14120ef76d3884175fc4f276a7220515c584a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018051214-2
Depends: libc, bmx6, libjson-c5
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 6542
Filename: bmx6-json_r2018051214-2_x86_64.ipk
Size: 7308
SHA256sum: dd33fc00122209ab4bf357545480ee419ea71257a5cf104990b5d6f399221842
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018051214-2
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 4863
Filename: bmx6-sms_r2018051214-2_x86_64.ipk
Size: 5577
SHA256sum: 38869c06e910b91b10ef9c85f6c6b87c3475d4580e1dc8c447b18a342215f527
Description:  sms plugin

Package: bmx6-table
Version: r2018051214-2
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8445
Filename: bmx6-table_r2018051214-2_x86_64.ipk
Size: 9224
SHA256sum: 42f97aab4be5f3beadcb0f6184ac0e7ceed99def37d161a84dd96a3bdb11a0ca
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018051214-2
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8897
Filename: bmx6-uci-config_r2018051214-2_x86_64.ipk
Size: 9729
SHA256sum: 205e45483e917bf0d336d2ca13c1c92b872238010965bf418391e5c9307c652f
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018051214-2
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 135771
Filename: bmx6_r2018051214-2_x86_64.ipk
Size: 136622
SHA256sum: 41491f91d7093a09e765175e5a1b0cfd7a6d25c43eb9c1fd5ee19b1d0cda8552
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: 7.1.1-4
Depends: libc, bmx7, libiwinfo20210430
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 3985
Filename: bmx7-iwinfo_7.1.1-4_x86_64.ipk
Size: 4767
SHA256sum: 4fce1656f51d8741faf4de59ff30bc96407b16c0751053a76ec7b20228e9a34a
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-4
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 7747
Filename: bmx7-json_7.1.1-4_x86_64.ipk
Size: 8527
SHA256sum: ecade7df595235de07fa9eaa29a6fcac311935de29ae1571198227263eba292c
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-4
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 5298
Filename: bmx7-sms_7.1.1-4_x86_64.ipk
Size: 6030
SHA256sum: a9f269b1da699798bb79795ab33cab16b1c4e76f47f0339582283ce2efb1eadb
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-4
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 9461
Filename: bmx7-table_7.1.1-4_x86_64.ipk
Size: 10243
SHA256sum: 51302b45211980b2d8e69c7db71e82faf18190983659fc65f77715bd73eda751
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-4
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 4747
Filename: bmx7-topology_7.1.1-4_x86_64.ipk
Size: 5494
SHA256sum: f1797ffa08714d1922f3d40f1ac37d318859fc991d0c5fafd130afa348e38b97
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-4
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 25869
Filename: bmx7-tun_7.1.1-4_x86_64.ipk
Size: 26603
SHA256sum: d3757c675094bf342a43fe015a60b704ec58ab554e4fd29050be9f99144bb1cb
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-4
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 8626
Filename: bmx7-uci-config_7.1.1-4_x86_64.ipk
Size: 9432
SHA256sum: 8703cdc214fce40761069ef1b67c727ab1c75356c019b49953444ea7275350fd
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-4
Depends: libc, zlib, libmbedtls12, libiwinfo20210430
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 170160
Filename: bmx7_7.1.1-4_x86_64.ipk
Size: 171055
SHA256sum: 8b0f66b8b5afb00cf7d863c1d5454c6aab0db9a9072d4b0e79d436e8f2691548
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 330867
Filename: cjdns-tests_v21.1-4_x86_64.ipk
Size: 331507
SHA256sum: f99530855af363525bebc0dadd81d78e7d2c40ec6b68ad9d660bf9a9c9599136
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 389741
Filename: cjdns_v21.1-4_x86_64.ipk
Size: 390779
SHA256sum: e2878c19bf06507c94c3f56e56e595a9454d97cdac95d7b24a5b1e361f3287b0
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_x86_64.ipk
Size: 1386
SHA256sum: 1af4b7713222b20be866d43eca174280cebbff63c5422d8dd92aea230395fc13
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_x86_64.ipk
Size: 926
SHA256sum: 1089f5770b17fce10222a2ec00b0cee63ecdc34c49f93306388ff94bc34098c3
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_x86_64.ipk
Size: 914
SHA256sum: 6736c8647f48ed72cca4151e22ee4c45fcf942c5089742e4083466e844258850
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 104366
Filename: hnetd-nossl_2018-12-21-c4376661-1_x86_64.ipk
Size: 105468
SHA256sum: 07a94fcf431adcc22a745850969066a7374311868f0e4e6ae36196687f7d9f7e
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 115039
Filename: hnetd-openssl_2018-12-21-c4376661-1_x86_64.ipk
Size: 116067
SHA256sum: a91a073fad417a8f173c2b8b009f47afde914f83726261252081cd966edeae59
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: x86_64
Installed-Size: 7423
Filename: luci-app-bird1-ipv4_0.3-5_x86_64.ipk
Size: 8238
SHA256sum: 3ef345532a5ea7e7620649290b16a69e37c01c6952d31bd8fc7fc401f9e5571d
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: x86_64
Installed-Size: 7468
Filename: luci-app-bird1-ipv6_0.3-5_x86_64.ipk
Size: 8272
SHA256sum: c517fd6c517362a441cd174f9b7f37cb9a8bbfc718e912dcf13f8fd36730cc8c
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: x86_64
Installed-Size: 30302
Filename: luci-app-bmx6_6_x86_64.ipk
Size: 31114
SHA256sum: 0c70932da7cd3a6f1a5808b5021c0cdc9a25bd54af4259b0faf1e190358724e3
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: x86_64
Installed-Size: 5673
Filename: luci-app-cjdns_1.3-9_x86_64.ipk
Size: 6552
SHA256sum: 10be6cb100901001a77d40475d591ef58bde5c7ede176c15a93ff46390da6d8d
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_x86_64.ipk
Size: 57610
SHA256sum: ea1d0d20e0e1263182d47cf2961c73132df6871d13b703968a7ccbe9e17e130b
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: x86_64
Installed-Size: 23282
Filename: luci-lib-dracula_6_x86_64.ipk
Size: 23990
SHA256sum: 362dd315347c39e4972eab2b146fdf2b8976cc4a18213e8d9271cbfb89d2a726
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: x86_64
Installed-Size: 24819
Filename: luci-lib-jquery-1-4_6_x86_64.ipk
Size: 25547
SHA256sum: 80d7357489846b3416191165888530fe703990abbe6b4767e271042f72f85ffa
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-3
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: x86_64
Installed-Size: 126371
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-3_x86_64.ipk
Size: 127413
SHA256sum: 0e74609055522b1d7bdb39f6ac05c09a4d5bb3768c032409579e6c17eaa1533e
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 1.2.0-3
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 3803
Filename: mesh11sd_1.2.0-3_all.ipk
Size: 5037
SHA256sum: fcc30ec57d705a1a68ef82b6226aee772daa04c21c3fdb97d9008f1842bf33ac
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-2
Depends: libc, libubox20210516
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 6321
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-2_x86_64.ipk
Size: 7385
SHA256sum: 6ef20a1a2d972d63a4fac609c010ae6ce268cc2095f86d2bfd7160ba8fbb43eb
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33-7
Depends: libc, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 296292
Filename: mrd6_2013-11-30-c805eb33-7_x86_64.ipk
Size: 296335
SHA256sum: 72deddc3a90d59ce5cad35e656ccd0259b46cb98262673d8d4d2b78b7d24133c
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1940
Filename: naywatch_1-7_all.ipk
Size: 2843
SHA256sum: b71d89cb7d9768e3f7562af2686d00c87add5ff9a8f00d0e0cfbd60427cf48ea
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-1
Depends: libc, uclibcxx
License: GPL-3.0+
Section: net
Architecture: x86_64
Installed-Size: 34338
Filename: ndppd_0.2.5-1_x86_64.ipk
Size: 35440
SHA256sum: f6782e2520b9c0e00b7e67574d11c902fa5a76ede312ba7e954cb5f1039b348f
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: x86_64
Installed-Size: 47846
Filename: nodogsplash_5.0.0-1_x86_64.ipk
Size: 48885
SHA256sum: a4f026df111b37edf61ae755543c9cff9afa5527229e40cf8f2b297a0b1dcdb1
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20210516, mdnsd
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 11074
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_x86_64.ipk
Size: 11898
SHA256sum: 73dc0c600aa2809122be734b53a7d8c2271c9ae19c7c6cee9297a6256d402173
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2073
Filename: olsrd-mod-arprefresh_2021-06-12-4973feb5-8_x86_64.ipk
Size: 2818
SHA256sum: 2a49e586e51b330d2dea90fcdfe3d2300bc7b530cb7a98d74d5fdb2778e73358
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 12232
Filename: olsrd-mod-bmf_2021-06-12-4973feb5-8_x86_64.ipk
Size: 12975
SHA256sum: 6053c021d7fbe4c4fc9bd63ee9f7af2e468155a29611482ec0e67bf37b0a1551
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 3771
Filename: olsrd-mod-dot-draw_2021-06-12-4973feb5-8_x86_64.ipk
Size: 4521
SHA256sum: 1cfccfa68a62c471939680416bacb20a0839ac13cd020e5c963929fc315feb0c
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2351
Filename: olsrd-mod-dyn-gw-plain_2021-06-12-4973feb5-8_x86_64.ipk
Size: 3105
SHA256sum: 25390b446efc7abb64cb9d9b2cf261e2b2dd27d4c1a9bc76f97f707ea3c73382
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 4114
Filename: olsrd-mod-dyn-gw_2021-06-12-4973feb5-8_x86_64.ipk
Size: 4872
SHA256sum: a41a039f02192b9350ec2574468288abef4cf0589a618f79f503dc4188777693
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2592
Filename: olsrd-mod-filtergw_2021-06-12-4973feb5-8_x86_64.ipk
Size: 3332
SHA256sum: de0adb17247154ad3ad13993f73a8bc3e7ccacbc1ab676657765dc445724435d
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 30626
Filename: olsrd-mod-httpinfo_2021-06-12-4973feb5-8_x86_64.ipk
Size: 31409
SHA256sum: 164a61883d6af48f2db3a8e61080a9d8e886c81c14dec2f10ae3d65f75b4f30d
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 22849
Filename: olsrd-mod-jsoninfo_2021-06-12-4973feb5-8_x86_64.ipk
Size: 23581
SHA256sum: 3cb4f03b4f41b16f14a0081648be78366323e2e945ae2af9ffe087f05b7c7b58
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 9134
Filename: olsrd-mod-mdns_2021-06-12-4973feb5-8_x86_64.ipk
Size: 9877
SHA256sum: c1467232b7529c5385b64c037a87f988ef8e71b1217a8bcdd454676390672613
Description:  MDNS/Zeroconf/Bonjour packet distribution 

Package: olsrd-mod-nameservice
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 11051
Filename: olsrd-mod-nameservice_2021-06-12-4973feb5-8_x86_64.ipk
Size: 11828
SHA256sum: 29a884aa969816a52b666e8ddeb97c39e6ee47fa2ee66d0a007c674b05dce7ab
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 13185
Filename: olsrd-mod-netjson_2021-06-12-4973feb5-8_x86_64.ipk
Size: 13927
SHA256sum: 043037c5486a33ffceea5e9676f8bd051129c0bbdee02e19116d6960c149d879
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 8724
Filename: olsrd-mod-p2pd_2021-06-12-4973feb5-8_x86_64.ipk
Size: 9497
SHA256sum: 7edb043f80b3b84119b1c3889bfed5b3de43180faf11ac6979266539f6401a92
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2959
Filename: olsrd-mod-pgraph_2021-06-12-4973feb5-8_x86_64.ipk
Size: 3717
SHA256sum: 03f5cd0fa790d073bd96813cc285ea36159f3b311e2980ebb990cf33707f084a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd, libgps29
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 61714
Filename: olsrd-mod-pud_2021-06-12-4973feb5-8_x86_64.ipk
Size: 62476
SHA256sum: fd7f79b044ccd7ef0043a3268bd97eba6b1c1908f0a623b1c1493e623d730da5
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 6396
Filename: olsrd-mod-quagga_2021-06-12-4973feb5-8_x86_64.ipk
Size: 7139
SHA256sum: 419683865ec4d72f651c2f9702b8d2caed86643e58d7b4e36396be02f429337b
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 9900
Filename: olsrd-mod-secure_2021-06-12-4973feb5-8_x86_64.ipk
Size: 10694
SHA256sum: 3cc291f8375ee4d96bddeb89279dce640ed0100729e05d6fb6e6f1124edacf41
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 4486
Filename: olsrd-mod-sgwdynspeed_2021-06-12-4973feb5-8_x86_64.ipk
Size: 5296
SHA256sum: 80ce010acc6964d57f06418ce8beba9308a3b8647feaee2c9d5ffaba76948042
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 14583
Filename: olsrd-mod-txtinfo_2021-06-12-4973feb5-8_x86_64.ipk
Size: 15317
SHA256sum: ba36688fea5d0e5f23cf3891a99203511cb6ce3a4b86ad80f9affe4412bfa597
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 1729
Filename: olsrd-mod-watchdog_2021-06-12-4973feb5-8_x86_64.ipk
Size: 2469
SHA256sum: cc83414e1d22ccb845959d8e1d116648b85784601c2108631b98b7accf5df6a6
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2021-06-12-4973feb5-8
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 1180
Filename: olsrd-utils_2021-06-12-4973feb5-8_x86_64.ipk
Size: 1929
SHA256sum: 2086440e5eaab71d2b5ae12d074c5ebc4da17c8383d8293bd90497ce7e678b7e
Description:  Utils for OLSRD

Package: olsrd
Version: 2021-06-12-4973feb5-8
Depends: libc, libpthread, libubus20210630
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 139701
Filename: olsrd_2021-06-12-4973feb5-8_x86_64.ipk
Size: 140628
SHA256sum: ad8fc8db236db3615381818ac7a92fca10f2635fa5136bc353b709a3648ca25e
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: v0.15.1
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 129607
Filename: oonf-dlep-proxy_v0.15.1_x86_64.ipk
Size: 130482
SHA256sum: 90a5b0785abc304477df74a057c7b87c245262a4be2e859822c0bcc67c8ad4ab
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 0.15.1-30
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 124614
Filename: oonf-dlep-radio_0.15.1-30_x86_64.ipk
Size: 125460
SHA256sum: 08b0dc06a42bd047b7777c8dddfa86648a013177c8711aaaf44f2c970b8f82c7
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: x86_64
Installed-Size: 1385
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2117
SHA256sum: 3169fb84db791e597948abf48ed7e09ac61e5849266c105c682e155a8da2c789
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: v0.15.1
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 194156
Filename: oonf-olsrd2_v0.15.1_x86_64.ipk
Size: 195013
SHA256sum: d40b6f95bd7e0b934a6b90a37778b8807fdd8c736a7e37fbc9c7902a269008c9
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 9.8.0-2
Depends: libc, kmod-ipt-conntrack, kmod-ipt-nat, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 145078
Filename: opennds_9.8.0-2_x86_64.ipk
Size: 145041
SHA256sum: 4331c79634b98d8d84029b047baf60d6e692a5a81ccb256c70f6e39919859a00
Description:  openNDS is a Captive Portal solution that offers an instant way to provide restricted access to the Internet.
 With little or no configuration, a dynamically generated and adaptive splash page sequence is automatically served.
 Both client driven Captive Portal Detection (CPD) and gateway driven Captive Portal Identification (CPI - RFC 8910 and RFC 8908) are supported.
 Internet access is granted by either a click to continue button, or after credential verification as a result of filling in a login form.
 The package incorporates the FAS API allowing many flexible customisation options.
 The creation of sophisticated third party authentication applications is fully supported.
 Internet hosted https portals can be implemented with no security errors, to inspire maximum user confidence.
 This version requires iptables-legacy.

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-2
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: x86_64
Installed-Size: 87548
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-2_x86_64.ipk
Size: 88488
SHA256sum: c93ad71d018cabc8383ede82bfcb9da4b7651bd28592c42a31ce5eead4f37b85
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-2
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 30017
Filename: prince_v0.4-2_x86_64.ipk
Size: 30955
SHA256sum: 025aec5022a1c948a1c6fcca4843bc14ae9960f384418b11558ab9665e24d8e2
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 226493
Filename: quagga-bgpd_1.2.4-2_x86_64.ipk
Size: 225680
SHA256sum: 736f2aa88e856fc8196845a9d0d4cdf7ec1a6e6e572f201d4b5d55f678208ca6
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 98808
Filename: quagga-isisd_1.2.4-2_x86_64.ipk
Size: 99585
SHA256sum: def128b46226cd547cbd86c0ca6f982d124160e130410cf6e535301b79e271a2
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 201676
Filename: quagga-libospf_1.2.4-2_x86_64.ipk
Size: 201219
SHA256sum: e142152339074d06f3d2b8c838d3ac2ec834043368ed10a8648d308114e00bdc
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 144230
Filename: quagga-libzebra_1.2.4-2_x86_64.ipk
Size: 144037
SHA256sum: 75eca26408e681bd03009aaeb0daca485010c2aebf0e0f4fd42d8adbd428a9b6
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 94320
Filename: quagga-ospf6d_1.2.4-2_x86_64.ipk
Size: 95139
SHA256sum: 31b15aabf3d93d9656428cb064586f82f0ada7fc1e9aa94b37af4a51d85e856e
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 3499
Filename: quagga-ospfd_1.2.4-2_x86_64.ipk
Size: 4242
SHA256sum: 665c4ae57abb31868368c6577e52269573271ab33dc9c73002b2df3323b5c620
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 38765
Filename: quagga-ripd_1.2.4-2_x86_64.ipk
Size: 39599
SHA256sum: d2c9045a69cc7556c34c4a3624cc01e9d9ddeee833ecebb4dc5ec23ef3f5d846
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 31429
Filename: quagga-ripngd_1.2.4-2_x86_64.ipk
Size: 32204
SHA256sum: 67317405bdfb4fe3b810aedf4da5e0ddecc8944430ce63cebe5cd1c8b784e167
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 123086
Filename: quagga-vtysh_1.2.4-2_x86_64.ipk
Size: 121983
SHA256sum: c47c1bd2c75ec4bf9da7f5e8dfa33bb269026ba235d6fae4d468d25eeee467f2
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 11616
Filename: quagga-watchquagga_1.2.4-2_x86_64.ipk
Size: 12362
SHA256sum: caff7c7cfdeb7164e8faba8f882ca4b2183c1044f0ef7d95e447b85af9182152
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 95971
Filename: quagga-zebra_1.2.4-2_x86_64.ipk
Size: 96731
SHA256sum: b9193d5de1fd159345ba12f9dd7196ed38c9dc5448f8e8d7135fbdbee502ffb9
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 2380
Filename: quagga_1.2.4-2_x86_64.ipk
Size: 3186
SHA256sum: 1a6777fd74fb6fba38a05b374ffb5c0916446d8ef8b232f12fa4fa723bbfd3a4
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-2
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 11576
Filename: vis_1440-2_x86_64.ipk
Size: 12368
SHA256sum: ce0633082e323ba1edf70a19db2cea3589e2a1d8bb502a00bcf3ab2f7496221a
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20210516
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 8936
Filename: zonestitcher_2020-05-22-0dfef1eb-3_x86_64.ipk
Size: 9781
SHA256sum: 3784b55b5e15fd0438795559fbe3c74487ef1f657b64a6fdf9fe98b72bfa041c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.