Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 22852
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 23553
SHA256sum: a242ac1fba007d75a54ec13dae1d9d6f8ed2a448711ac1cbe6f47250a2633e86
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mips_mips32
Installed-Size: 26676
Filename: alfred_2023.1-1_mips_mips32.ipk
Size: 27549
SHA256sum: e407c612f7024db7ef28c361e4c594e763d92df12ccf86681ccb2cd8e00d1c0b
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3952
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4610
SHA256sum: 3e02f2f5f6fcdca1c75c076628584f565110e4a3a047fc79dd743e95141fe33b
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 63470
Filename: babeld_1.13.1-1_mips_mips32.ipk
Size: 64468
SHA256sum: 65249b255b63effa23fc1054469da7e26240169c5e04f0fe2f018cd46df58904
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 41413
Filename: batctl-default_2023.1-3_mips_mips32.ipk
Size: 42030
SHA256sum: 6cad25db46e63caa6b239d668f54b2ed702374247d80bc3a0b7851bb05396257
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 48970
Filename: batctl-full_2023.1-3_mips_mips32.ipk
Size: 49496
SHA256sum: 7f2ce4606f0a14904f9544b3472e42fd10311e50e7cafedd8f9f7ff8404b1ec7
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 13542
Filename: batctl-tiny_2023.1-3_mips_mips32.ipk
Size: 14456
SHA256sum: 23b7757da90c2075a3342b2a558aa9171a2647bd8e3e8735b8fadb417338de0d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 39306
Filename: batmand_1440-1_mips_mips32.ipk
Size: 39889
SHA256sum: 755fcef0ee400bce5efe958316921e03e10f7bb19f37f6f0363f126a94f38638
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6834
Filename: bird1-ipv4-uci_0.3-5_mips_mips32.ipk
Size: 7869
SHA256sum: 6a8a2bfca827632daea2abe351cf19ce5cccf2fa71bf7a950d5c9c9276af6bf1
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 209889
Filename: bird1-ipv4_1.6.8-2_mips_mips32.ipk
Size: 210568
SHA256sum: 048eeb643d93dd37ba5dd0f7b802bd616fbefbf5c01732edccce10452229cae0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6004
Filename: bird1-ipv6-uci_0.3-5_mips_mips32.ipk
Size: 6968
SHA256sum: 2bbad561f3f572d93b89884778522cd0eba7372e387e55a51f4972873a12b854
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 241469
Filename: bird1-ipv6_1.6.8-2_mips_mips32.ipk
Size: 241958
SHA256sum: e8f6c83976c9c868514c7d08b9614bf46ba1132faa8dc89af11c0b6860be9b27
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8972
Filename: bird1c-ipv4_1.6.8-2_mips_mips32.ipk
Size: 10012
SHA256sum: 7797a06769ea2952ff1f3aaef96f2212dec8154c460c135064f9721dfa2d7469
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9026
Filename: bird1c-ipv6_1.6.8-2_mips_mips32.ipk
Size: 10070
SHA256sum: d555be4e29215408b783348e1c41073eaa8bffb2ad4463382c12e97fc6fc6193
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8326
Filename: bird1cl-ipv4_1.6.8-2_mips_mips32.ipk
Size: 9315
SHA256sum: dc0d8acfee4438d050d9937caa4a3e0346f370c592a427c5ce2c5ff5f8e4adf2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8410
Filename: bird1cl-ipv6_1.6.8-2_mips_mips32.ipk
Size: 9409
SHA256sum: 60b1af7a321e3d0060b43a99f2d1158025d0a80986c7ca0acad24cbf7f311376
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 401123
Filename: bird2_2.15.1-1_mips_mips32.ipk
Size: 399732
SHA256sum: 3704bb700f8e1e8d1482fcaba957eb490788e417d2ab5362dcfad74a5d60ae02
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9574
Filename: bird2c_2.15.1-1_mips_mips32.ipk
Size: 10528
SHA256sum: 3edd3089047d6b06158de00d995e7f82b6bab63e7527d11a6dadb42191124b3f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8320
Filename: bird2cl_2.15.1-1_mips_mips32.ipk
Size: 9204
SHA256sum: ee7aef34afb984f4334e47152e87dfa3dde3b0dab7e1896dd29230146095a64f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 4019
Filename: bmx7-iwinfo_7.1.1-5_mips_mips32.ipk
Size: 4651
SHA256sum: 9ef2c1f994f00dceea6a4df61e0b27731842ecbcbd94cd1876fd885882246c83
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7986
Filename: bmx7-json_7.1.1-5_mips_mips32.ipk
Size: 8669
SHA256sum: 9f8ed240e42b68a7fb1a6ef2609cd870cb565d0793c2e7da78b7978641d3e9af
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5559
Filename: bmx7-sms_7.1.1-5_mips_mips32.ipk
Size: 6131
SHA256sum: 3ca0eb7b4b4096bb07d694b7a98d2156fc6ee0e4eefa53d6e6c4d93565ff7daa
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9485
Filename: bmx7-table_7.1.1-5_mips_mips32.ipk
Size: 10145
SHA256sum: f897930aa2aae4f0a5cc60fa6512b4b29dc961c3231077167e17180b096a059f
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5111
Filename: bmx7-topology_7.1.1-5_mips_mips32.ipk
Size: 5676
SHA256sum: bde33152246cedf8899f99d80e738681db07a3602dfe8eebd6cb208f26a29e7f
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 25297
Filename: bmx7-tun_7.1.1-5_mips_mips32.ipk
Size: 25947
SHA256sum: 4f8c6d1b7cffb35a254e0e2258f4f30733f46e138fc9893e3a60d9410ec0e986
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8090
Filename: bmx7-uci-config_7.1.1-5_mips_mips32.ipk
Size: 8823
SHA256sum: 00cdb25c1876b9d6c7caad654781cf574881e9dab699ef5ac85ecd1eda6cba8b
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 179241
Filename: bmx7_7.1.1-5_mips_mips32.ipk
Size: 179521
SHA256sum: 3ab1461b51e90f927d5d0a92aa15324bd8a70fdbbbc3cdd9c1653565bbd0596c
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 378729
Filename: cjdns-tests_v21.1-4_mips_mips32.ipk
Size: 377817
SHA256sum: 21371c5814d2a231c2a79fa4e0c44cc2809c66a6d642bf200defa3701ec21238
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 456881
Filename: cjdns_v21.1-4_mips_mips32.ipk
Size: 456408
SHA256sum: 0996a26cb3f9a17d978fd4f6832cca4fa73a0a344b236ff29b3eca50b0963a00
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 1392
SHA256sum: f2bba9d19cc72a7a72defb9511a0cdf29b5c3dedcafdf027346ee7cc5e4a80ba
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full-secure_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 928
SHA256sum: c3cdfaf633e59f80ab5d2f272794a37e24b3f9beb0889885358aeab5b0cc06f3
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 913
SHA256sum: 8cbc9dc3c9e560cd3b9fe9183f73a88ede9ec57470d895da6dc21eda3cc52f3e
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95825
Filename: hnetd-nossl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 96363
SHA256sum: f8e0c3fd36d18d16e5b4e8586c56baf1b5c17f0f46b903f52e4a37fbea2552ed
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 106610
Filename: hnetd-openssl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 106489
SHA256sum: 952a81159bac66b68e7d45e7cc266ad84be6f0c16e09d0f07d2ff7f62b0767e1
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7425
Filename: luci-app-bird1-ipv4_0.3-5_mips_mips32.ipk
Size: 8243
SHA256sum: 57b6ba31bd6558f558455bf532d121cfa3c455da4c427797cf3d9a86181515ee
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7471
Filename: luci-app-bird1-ipv6_0.3-5_mips_mips32.ipk
Size: 8282
SHA256sum: 1a59afdd73339b247f586632e456e3cb93834eaf668eb9dbf0e91ec4497a30e3
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 5674
Filename: luci-app-cjdns_1.3-9_mips_mips32.ipk
Size: 6561
SHA256sum: 7d77cb2dfd87750eb313d503434fe5b9a562c2a483292b1afe7967077c3f71b9
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 56779
Filename: luci-app-hnet_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 57617
SHA256sum: 3bb374dd1c5dc6a842dd56c666e5265dfb90a7706edff53bf7562a7b10ff4a8b
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6973
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7849
SHA256sum: 8db529aed6b96138b5de05e0b0ec90d8f23eb1ca3168d08c04fa234a067cbaf0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 122246
Filename: mcproxy_2017-08-24-93b5ace4-9_mips_mips32.ipk
Size: 122503
SHA256sum: 30eb8f59407da708b5107799303849eb8364df3e33288558615c883fb54eb109
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24096
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25644
SHA256sum: 1818a94c60050cb49524608bed7b5e99677d7b66d314f235c63adcc1bdc7667f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6563
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips_mips32.ipk
Size: 7568
SHA256sum: 1c86021a4988cc4fe0efc8e5f0d52f26eb1138d4fba7d1f73c11612ffefba0b6
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1947
Filename: naywatch_1-7_all.ipk
Size: 2852
SHA256sum: 2eba083d0b2daa960aadedbb04ccaac03cab8530d4807381b3d998c7cfcd3f66
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 31252
Filename: ndppd_0.2.5-2_mips_mips32.ipk
Size: 31744
SHA256sum: 902c2e34e6213547251e5ec523abbb497564429de6f55badeee4436785466a7b
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 45729
Filename: nodogsplash_5.0.2-1_mips_mips32.ipk
Size: 46148
SHA256sum: 889375c7d1c880eb60069cc2b445c3c926096d37e60e996ae908e64427d4f38e
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 11048
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 11779
SHA256sum: 612a54c2c2671f01970ab9649ab08544af535270e4941d32036044531619c93c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2024
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2655
SHA256sum: dc17b035f1a0193db2b0ccaa33ad0a1d5e9e94a2ed0422a9838b941f870389a1
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 12116
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12817
SHA256sum: 91a72618b12495e5a45350133c308c2f07a50cdd16acdbc9ed989dd33ebc0f3d
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 3807
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4412
SHA256sum: a15a0a01835bc56527115a68afbd34d51174b3b33448d6ea89028c669f377592
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2392
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3035
SHA256sum: 405bc61f7ad474417ed525fb6d046fa8b7a74069b7efd4d0b8cc7441990bbddc
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4224
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4821
SHA256sum: c8c9e7d4e4356bd23bb7163cd92410ef4d9145d8a96776cc83eb067b74f81499
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2578
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3202
SHA256sum: adddb6765b0b163b06c8fdc2e96c68e3a7be530288b9b7ab8b2442762c57686b
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 31284
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 31798
SHA256sum: 26a1ee2cf61809bd2317d5dd8d88d352fe2fdf639b9815b84e0700e1f08fc89b
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 23085
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 23806
SHA256sum: eedb55add328484af9003a4c43c3f4539dba9eba78406b9a12fcc8a482961e85
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8829
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9495
SHA256sum: 474a68e197d84cce9d5cc850a6126635cd05db9257aff9f499d2f329e83968c0
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 11421
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12011
SHA256sum: 00b41fd6aa08052365da089c71f7f235fc0c96d3ac31deffba5643685833556f
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 13214
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 13821
SHA256sum: dde241aa88f797587889f0391cf71a7a9901a25d4b902735b9cc9791425a9f97
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8577
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9232
SHA256sum: 642034f32df87bcb9ff0e4f2b1b9e7da922019783172f394a5edc7e582dcbbf1
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2963
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3593
SHA256sum: 09ee6fe1c99bbc05cf0cb5d1618ccb544a07a35e30df553324c7ad4113a7ec06
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 62920
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 63356
SHA256sum: 48ff7242a2e3b7b9eb4244b1461d1bf5322df2975837b61c044aa047a2e8f1fa
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6232
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 6952
SHA256sum: a48ed4fed76eb77afb3375a2cf584ae5c65a4dca2a5841ab0297f960029feba5
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 10294
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 10973
SHA256sum: 97285c8301a0844117c7c468674e972b7dbb698b147a3343d87a9f35e27ce333
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4513
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 5157
SHA256sum: e9db7590d44694a89eba3f196689c6ce82ffd6447a14335426a27e7624831bfd
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 14999
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 15608
SHA256sum: a321f13f4dbb558c37e01cae6b339f448af23ce342043d7714c98f04089b9008
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1711
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2375
SHA256sum: f0887e2920756402946ebd09576f26d4d5c93af73457627013c781c07eaee1cf
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1179
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 1928
SHA256sum: d8604fb534468610f197e2b9e705335897fc5853c92a3092a044dcad086c08a2
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 140485
Filename: olsrd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 141154
SHA256sum: 631ffaccbefd9dbde9ee478eba6d0eaebcc0a97bc9e319b9216ab935932dba55
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 159784
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 160242
SHA256sum: 094153685fa61859a8bc08bd34d15329b478a9f71f72590b588aa1a3ad3583e5
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 155801
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 156158
SHA256sum: 1b8affe663acd48a36cff5d8a109e683408f6e8774b9b4dc09e47117a4d817cf
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2274
SHA256sum: bc45692f627ce3fa3cd76127138ae851602504f20b3438bd657c45928bb0a1ef
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 232775
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips_mips32.ipk
Size: 233038
SHA256sum: 443f187c01b86c9f0f3315b4f495259e92cec639439d898ef0847d4f2c42f5dd
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 159887
Filename: opennds_10.3.0-1_mips_mips32.ipk
Size: 159047
SHA256sum: ebb9166c63113b50a43e5d6c03e1db15f8dc87cb48e5e347f32423804aa5ba74
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78921
Filename: pimbd_2018-06-19-dbf4e591-4_mips_mips32.ipk
Size: 79695
SHA256sum: 85d63855c6dccb8c011eb33f29a6902b55abe936cddec1c82bafae54ce3fb4b5
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 33226
Filename: prince_0.4-3_mips_mips32.ipk
Size: 33786
SHA256sum: d9471e09b7580feb76a1f023ca633d409e1a87547481326c81b15c758b80baf7
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 203864
Filename: quagga-bgpd_1.2.4-2_mips_mips32.ipk
Size: 201981
SHA256sum: 3c6a839754d8508e942689e2d74c417538f795aac368f935501343f5b0959fa5
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 90475
Filename: quagga-isisd_1.2.4-2_mips_mips32.ipk
Size: 90217
SHA256sum: 51d8cea5c1abcc176e53f747d2fdfd134cd1bf9bdcdd31c8a3e58d003d099219
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 182446
Filename: quagga-libospf_1.2.4-2_mips_mips32.ipk
Size: 181862
SHA256sum: 3dd423acca0e5b82b5dafae83ba822dad5090e2a5d273f4235b9524f65aee7d2
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 130677
Filename: quagga-libzebra_1.2.4-2_mips_mips32.ipk
Size: 130143
SHA256sum: 7eca2c180e3fd467f6f564771a9bdba3596c027ab7f2dbeca92d787a6bca7d2e
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 85936
Filename: quagga-ospf6d_1.2.4-2_mips_mips32.ipk
Size: 86086
SHA256sum: e582e850bcf7dcef90bb90a00c05dc62b0025135feda8461c628baa334a5d449
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 3746
Filename: quagga-ospfd_1.2.4-2_mips_mips32.ipk
Size: 4367
SHA256sum: 51898d468ed908632228d8350619474c537a9f0c14b4505be75119fae9d5e0c6
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 35206
Filename: quagga-ripd_1.2.4-2_mips_mips32.ipk
Size: 35288
SHA256sum: ed2549fcb54550207ce00dc18e30c26169ac95143633e0fd3fcbcf06a909afff
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 29519
Filename: quagga-ripngd_1.2.4-2_mips_mips32.ipk
Size: 29583
SHA256sum: 7fd208ba492d9f60ee26f1bf50dec0aee529805ef8c4ddbf4abc9e43ae7201b6
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 133468
Filename: quagga-vtysh_1.2.4-2_mips_mips32.ipk
Size: 133283
SHA256sum: 99e482b632bd1896a720722ef9d961070691390e8373dff51178ac0f87ba58f4
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 11503
Filename: quagga-watchquagga_1.2.4-2_mips_mips32.ipk
Size: 12094
SHA256sum: 23a97a31bd544400b24d5b1afa8d953f2d107e63df811b9cab210cfe2d02b8c1
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 87873
Filename: quagga-zebra_1.2.4-2_mips_mips32.ipk
Size: 87237
SHA256sum: 2aeae601cfb1a5ae611de16e28bee6b043b8eca941ec8f7866dc268fc1dc7732
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 2382
Filename: quagga_1.2.4-2_mips_mips32.ipk
Size: 3202
SHA256sum: 1a745ec54c31d4c3d8a8225094dce5e6bfc3144db34d2b3a7bad42ecff983da4
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 10457
Filename: vis_2013-04-07-7710cce4-9_mips_mips32.ipk
Size: 11122
SHA256sum: 8a63d34eb10e63ac707d0ba7462d075b40322553352b774cff65370f87ee8a88
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 8836
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 9506
SHA256sum: b31860a372608e47bce0592194b4cd83f82a449a887144e64541fa3041ef13ef
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.