Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 22847
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 23543
SHA256sum: 6ca0a942b746522aadc775eed8cdfb00d2ef4ff09938b2704cafb1970fb4e86c
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mips_mips32
Installed-Size: 26673
Filename: alfred_2023.1-1_mips_mips32.ipk
Size: 27551
SHA256sum: 2be918f669ff05bc9bb60edf47641dd430831b00271114edc4f2bc63180f0926
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3952
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4597
SHA256sum: 55a39c0575c2788d88e39fc70fedb10f0ff033bb642d865c71c1fc58e463e0f6
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 63470
Filename: babeld_1.13.1-1_mips_mips32.ipk
Size: 64453
SHA256sum: ecc3f76b0a037e2cbd5e4f1215e5931309e2f0da407a2b392affb291bdedadd2
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 41412
Filename: batctl-default_2023.1-3_mips_mips32.ipk
Size: 42014
SHA256sum: 67c6da05cad5650cda15abd47f2ff8528e89da0ec684d15e9c79bade4d500b05
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 48969
Filename: batctl-full_2023.1-3_mips_mips32.ipk
Size: 49489
SHA256sum: 49c26f8bc9a3ba0e239dc97f335d55ee00330a8486f89668fee33cc8565aa40e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 13540
Filename: batctl-tiny_2023.1-3_mips_mips32.ipk
Size: 14443
SHA256sum: 0e76537282683987a1cf1e416c6a45f3ecdaf18067edbe64c2964e4eb6bf1c23
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 39304
Filename: batmand_1440-1_mips_mips32.ipk
Size: 39885
SHA256sum: 9736aac0eebddc4ccd822dca653542331412e351130bbe5b7fa42fc000c98735
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6834
Filename: bird1-ipv4-uci_0.3-5_mips_mips32.ipk
Size: 7867
SHA256sum: 3df2f3f33fdf3967366e46c3f86c414c7ec22b89dbbbdd52b0794d46d3f073e9
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 209887
Filename: bird1-ipv4_1.6.8-2_mips_mips32.ipk
Size: 210539
SHA256sum: 7baf56d1fc17efdb62b88e5a4796256ee42140bc09053b8e1b7e44f5ae884857
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6002
Filename: bird1-ipv6-uci_0.3-5_mips_mips32.ipk
Size: 6968
SHA256sum: 4deb1e6f214eac7436904465542d6e4dec054bc94a7223f2e5c8acbbb91bb428
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 241465
Filename: bird1-ipv6_1.6.8-2_mips_mips32.ipk
Size: 241980
SHA256sum: 62ebcffbc56b6cf0b4d850635d8f12e12473fb9f8bcb1c45f412b014d8ec5355
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8971
Filename: bird1c-ipv4_1.6.8-2_mips_mips32.ipk
Size: 10015
SHA256sum: 148cdd3083ccb96c132c04b622e52153a688f36cfa4674c65534617d295fb1fa
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9026
Filename: bird1c-ipv6_1.6.8-2_mips_mips32.ipk
Size: 10070
SHA256sum: ed444ce4408e66bc14bf8850b8bea9be77d62e5f98e6a4b67cc0694b25343de5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8322
Filename: bird1cl-ipv4_1.6.8-2_mips_mips32.ipk
Size: 9316
SHA256sum: a99ad9227d98f9ff5f194e0fd1893df870745dae49183eadf0be63555e8c6288
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8408
Filename: bird1cl-ipv6_1.6.8-2_mips_mips32.ipk
Size: 9403
SHA256sum: d67fd29567f88bd10c68838c15e0209eb48c9387f4ae894897a54c65155bffb5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 401116
Filename: bird2_2.15.1-1_mips_mips32.ipk
Size: 399718
SHA256sum: 196132dbee065b11b4564fe4fa2778dc04549affefb03a7f97bd8d5e76d471c4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9571
Filename: bird2c_2.15.1-1_mips_mips32.ipk
Size: 10522
SHA256sum: 4ba376e81a1c3817cd57b6c82efbfb36702cfa7d640867edb25ee77d9f577765
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8317
Filename: bird2cl_2.15.1-1_mips_mips32.ipk
Size: 9202
SHA256sum: e1ee745979663aa93ee6178648e9208a3b16dcba4e788b556fb1f62d07f90d45
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 4017
Filename: bmx7-iwinfo_7.1.1-5_mips_mips32.ipk
Size: 4635
SHA256sum: f6e2c9780b590664c5b091cf749bd3ba865bc6fe1fd5e7c321840df8324c3d65
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7985
Filename: bmx7-json_7.1.1-5_mips_mips32.ipk
Size: 8663
SHA256sum: 663f82a426780501c6545d9528e254ce86f8b8ddcb7ac0342283c02620f4af30
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5558
Filename: bmx7-sms_7.1.1-5_mips_mips32.ipk
Size: 6124
SHA256sum: bae2b359597db71750f299d9a5242cdae5a735c37ca6104d1daf6158ae7473d7
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9485
Filename: bmx7-table_7.1.1-5_mips_mips32.ipk
Size: 10145
SHA256sum: 53ab213788720365b33cd2f40bb51e568e04c7fa164b5ee71fc66f4e9cd7de1d
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5110
Filename: bmx7-topology_7.1.1-5_mips_mips32.ipk
Size: 5676
SHA256sum: d33c79bfd772e284afd2eca9ce55891a9e226c063f346144674c88e9ecbf5e49
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 25297
Filename: bmx7-tun_7.1.1-5_mips_mips32.ipk
Size: 25943
SHA256sum: 15c838a78134acba24d4e8fc3466f5ef484b5173a96e7637807910acd9d4257e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8088
Filename: bmx7-uci-config_7.1.1-5_mips_mips32.ipk
Size: 8809
SHA256sum: 6113adec627c2c33792d6355e5618224a478b073d5672e6d193cd37b47c17abb
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 179239
Filename: bmx7_7.1.1-5_mips_mips32.ipk
Size: 179516
SHA256sum: e8ce729d742df0014fd444ab1e58953bb5e534d928d6ab0b6f9a4898628efce5
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 378648
Filename: cjdns-tests_v21.1-4_mips_mips32.ipk
Size: 377716
SHA256sum: b1f27c8a49107f4d861de859d52919d0a359dc8186ea28b7a29bba3c20bbaa3c
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 456876
Filename: cjdns_v21.1-4_mips_mips32.ipk
Size: 456544
SHA256sum: 9a768599b312979d56c8cbb559fa95cceefe9a95aad0c7f96c76da8e1d91ec82
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 1386
SHA256sum: d2dfc1404612adf2a9361a34fe2d4adf2164274d3c2276dcc3e425ab1a552012
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full-secure_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 925
SHA256sum: 0f610acb6957ec603b3079d3396524685cae8fb7af7094221fc1fc4536d35d41
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 910
SHA256sum: 44212d58733c08258344f37719489c99719828010382d973663c66d1313ebaff
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95824
Filename: hnetd-nossl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 96353
SHA256sum: a2c29d1236c9d02cfd944f3efc0c9b98203536a2db814233a6dde071a9113adf
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 106609
Filename: hnetd-openssl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 106491
SHA256sum: 7d0d505c83cb6bbf20954d3ec30121d186f5a872a0944c646e7450c9707b1941
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7425
Filename: luci-app-bird1-ipv4_0.3-5_mips_mips32.ipk
Size: 8245
SHA256sum: 93cbd875986346511d8dc1d6fd2e0bb83bcbed0be6274ddbae1400a3da470ab9
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7468
Filename: luci-app-bird1-ipv6_0.3-5_mips_mips32.ipk
Size: 8280
SHA256sum: 7975ab98bef0642aeda03a115ef7ba499c72fdc2f0a3ea9f4b6f24a2df935000
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mips_mips32.ipk
Size: 6558
SHA256sum: a04bb18803605385746d19d9f7988ffef94a3d795585883fa2a5ca45395375f9
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 57609
SHA256sum: 68aa31457e89a1cea7dfbf9c75e15671f0141133eaaaaedb62c5bea70e0a00f7
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6975
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7840
SHA256sum: f2775a6bcd1d48889a33cdb960ee7850027cb6f35159ebf40ebbc21ffb432f78
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 122244
Filename: mcproxy_2017-08-24-93b5ace4-9_mips_mips32.ipk
Size: 122491
SHA256sum: 27116584b74a52650ffe6fa24fde9b363237bba928b64039dc239344afb83a1d
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24092
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25635
SHA256sum: 66d71d24c362a0e3b3d4c946cac4c46fad13cd5268b1fdbbf5ea123289442b18
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6561
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips_mips32.ipk
Size: 7563
SHA256sum: 56577be0b3db041354b4de203f2748250794f06131f78da6940301fe29358f47
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1941
Filename: naywatch_1-7_all.ipk
Size: 2848
SHA256sum: 1fa72ca51130141b32514674d768d1362e20f48c05759cf6be6ae4cfacda363c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 31249
Filename: ndppd_0.2.5-2_mips_mips32.ipk
Size: 31736
SHA256sum: b43647b8ed22ddec0710d733157b6c71830b7c2584802a7425d605a5d98c1f51
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 45726
Filename: nodogsplash_5.0.2-1_mips_mips32.ipk
Size: 46143
SHA256sum: 05e38103e57c15af0dbf7c91f7da0c0aa986785a55f23944a0c75fccbba0a8e0
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 11048
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 11775
SHA256sum: 681285ffc8991724037f3cbbe1463c852ad9c4dc379cd74e77749f8343bf06c4
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2022
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2652
SHA256sum: c84a4e6e0c7f97088e46862a49b90155548839abb65b9af856198bb83bd5235d
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 12114
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12832
SHA256sum: 10be2bb8847ff8989fe5a24045d63e7e41303d58807c8991959faeb04173edd9
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 3806
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4413
SHA256sum: db9b0df4a8ccdc1096f1d7b2192363062f422de154b0e41cf0bf6f5f89e9e2a7
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2389
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3025
SHA256sum: a4eb1cf7fd3fa5ff26b1dd0b7eea6e4f2e70ebefd2ec4ffd773d7918cefc936c
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4222
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4826
SHA256sum: eb2d858696eb4eb0310f9de6aa08c47fd907429b4c9bc80bf277ed6d97ed704c
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2577
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3212
SHA256sum: 87374f498931394c2f8acd556040000274defabda71193075edb5d463f334311
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 31282
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 31799
SHA256sum: c3eed9a2f3e78f1795a2571ff5af319312e62edae07cb7682f6225e42f566b7b
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 23084
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 23809
SHA256sum: d007abe5979bba1c3d1e4a05b25ff1e72ae69da76f0ed32a2e8000b6b8b77c0d
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8828
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9490
SHA256sum: 19fe52b2450b0ad82eb22965cea162da3a9e192b206520f018225bdc293c0108
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 11420
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12001
SHA256sum: 7e0af92a597dddd77d00a94496f972922cd13732e8d7999bbc6e50986b752a7e
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 13212
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 13826
SHA256sum: c898814110c1ce047075a84acd6eb8eae1013a52ac79fb7f3b6645e22be159b8
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8576
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9222
SHA256sum: 07e27393d8d1f0f42802e13c6e6b4978f3a2e0faa035daa8e84812337c51864a
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2962
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3594
SHA256sum: f17e7b63a75faa81b27d978c4fdd01a4af50d6c5f47e29c0746ed7c5655284c4
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 62915
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 63377
SHA256sum: e11ac00c01b839ff587c035d96c3b1a7cb5c77757597a4bfbaa364591306eae3
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6231
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 6954
SHA256sum: 0071516ed9462535972fa1324495b1d4ae947f017c2bbe4705444a383e9ccef7
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 10291
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 10967
SHA256sum: 3d87b763d9b3f2681c3850a91c41e2554f3e9af69c8ab5211feb865369b159c3
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4512
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 5159
SHA256sum: a8cb3d6129040e5e285444042e3490cbb359d864303239a0e09a3e3069e98c7f
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 14998
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 15615
SHA256sum: ae7e06d86901e2c667535285f19f3145b5c33aabe6c47cea3751185c59e97c08
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1709
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2371
SHA256sum: 9467ea4c5cf1a6c4abcce0dc3f8fc0f0f5c1597e385ba6f2b70617863d40b261
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1178
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 1915
SHA256sum: d38e22160a1a9960ecf6387b7baddf99da07f20910ae6b8796ca3fc6afc458f5
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 140486
Filename: olsrd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 141147
SHA256sum: 2128c65630205fbdde13829955b72721c19c279cef28cf29de7bdc0081102c77
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 159782
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 160246
SHA256sum: 0e4ed8b087638f6fe337dcc65aaad2753b053360f7f9a510da7278c9eb9ec43d
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 155795
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 156120
SHA256sum: 621a3808336bd2510681680585b2c82da3306bff3a65509d8ec38d212129ed99
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1544
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2271
SHA256sum: db8138d88bb8b2caf87987094926517e3852e017ac2a6c73c05cb0000a525de8
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 232777
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips_mips32.ipk
Size: 233079
SHA256sum: c290ab8daaea9c4a4311b052aeebdded4093ffd78b615468ddd5ddc48255c4b8
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 159874
Filename: opennds_10.3.0-1_mips_mips32.ipk
Size: 159173
SHA256sum: 787a3688532bd22f641d32605c2f3fcdba8fc0ae0d3fcb15285c0ac3fda4b10c
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78919
Filename: pimbd_2018-06-19-dbf4e591-4_mips_mips32.ipk
Size: 79722
SHA256sum: c4c0cff3bbe2b00bc4177cc5d2de82573e12babc7647c04ce9ceff8795f500c5
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 33226
Filename: prince_0.4-3_mips_mips32.ipk
Size: 33784
SHA256sum: 8124fec5562ed9cc4a892a03b477e1b442fe4fbe0d6c94901182ff2d05b1e402
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 203863
Filename: quagga-bgpd_1.2.4-2_mips_mips32.ipk
Size: 201907
SHA256sum: c5407108a89199e64f0df765823f69b040a8029e77e8e7e479fad746775c16c5
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 90473
Filename: quagga-isisd_1.2.4-2_mips_mips32.ipk
Size: 90189
SHA256sum: ced7ba79c39bc43eb3c458fd91e56414970d7e3dc342e168c6805fcd49b9a0bc
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 182445
Filename: quagga-libospf_1.2.4-2_mips_mips32.ipk
Size: 181854
SHA256sum: 34999c2294eb244530027e22bcf48ab0c67d1f603824e7e6dbd547e2ca3f34f7
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 130676
Filename: quagga-libzebra_1.2.4-2_mips_mips32.ipk
Size: 130173
SHA256sum: 15ec8482f2532a42640e02f1ba6e11cae2572285a3136d7add4f426858b9f95c
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 85932
Filename: quagga-ospf6d_1.2.4-2_mips_mips32.ipk
Size: 86063
SHA256sum: a3a97b3b1d918ef83a704237eddf02f6d244598c3d65132c53ed2c72323c7423
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 3744
Filename: quagga-ospfd_1.2.4-2_mips_mips32.ipk
Size: 4367
SHA256sum: 99c4648cdb5f489e08f2e3e0338b94832e262a313a76891f3f6bcbda7a0ffab5
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 35200
Filename: quagga-ripd_1.2.4-2_mips_mips32.ipk
Size: 35263
SHA256sum: 547800bc9f1032492c2c53763b828cdfd5dc37da4bc25134d51ddbb499c200b3
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 29516
Filename: quagga-ripngd_1.2.4-2_mips_mips32.ipk
Size: 29580
SHA256sum: e2b1ed64c20bcc4ece04a44fe029defb41fb0721f5f808c4a89aea6564638b7d
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 132820
Filename: quagga-vtysh_1.2.4-2_mips_mips32.ipk
Size: 132660
SHA256sum: f916edc91176236701fb0c57704027259c9b7957ccb4713f233f97cc08f58822
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 11502
Filename: quagga-watchquagga_1.2.4-2_mips_mips32.ipk
Size: 12090
SHA256sum: d86a4d5c189ec40f3948c11031d5c7e4b52e1c8b69d00b87ed3a4259a7e133ba
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 87874
Filename: quagga-zebra_1.2.4-2_mips_mips32.ipk
Size: 87242
SHA256sum: 8494202ca22f54a546862d0eea6fb1b24e63f6f2dc1fa483976e0ddded6b5a93
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 2379
Filename: quagga_1.2.4-2_mips_mips32.ipk
Size: 3192
SHA256sum: 9c6c138d94bacf1495f1068077a1c2ef22f5747c6fd2bb11d9e31b124092984c
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 10453
Filename: vis_2013-04-07-7710cce4-9_mips_mips32.ipk
Size: 11115
SHA256sum: 4445c0c1ad07043f35c5e4a165fc713f897820bb68c8ae933f586f6ae6a38955
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 8833
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 9497
SHA256sum: 328f853bf84eefac6a8d1ff01aa1d69222222e012f85ebc80e34ed965b2d0aae
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.