Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 21834
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 22606
SHA256sum: 29d3575da63216a3a74d54096d02b3d522b3a422c057f40d77227f1b94406fe3
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2019.2-3
Depends: libc, libnl-tiny, librt
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 26477
Filename: alfred_2019.2-3_mips_mips32.ipk
Size: 27340
SHA256sum: 90fac33eb266150a9dc59a2447b37cb40e2d69813eb9f37e9ed84ead84fe135f
Description:  alfred is a user space daemon for distributing arbitrary local information over
 the mesh/network in a decentralized fashion. This data can be anything which
 appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3885
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4637
SHA256sum: a56b6507ba02032a2a1c6b380a0aad8db3accbc5182d35ae43400999806b98c8
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.2-1
Depends: libc
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 55695
Filename: babeld_1.9.2-1_mips_mips32.ipk
Size: 56694
SHA256sum: b55557482e81f0f9c0cc47ac9371fc5f8e06cf49eedcd1701655cf031d24e51b
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 40738
Filename: batctl-default_2019.2-8_mips_mips32.ipk
Size: 41272
SHA256sum: 4913196cc7c2ccb2802a92b5227044edbe8ec9bb7118e12457f19a39de202c36
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 48168
Filename: batctl-full_2019.2-8_mips_mips32.ipk
Size: 48672
SHA256sum: 0d4ac7e4b8d56a32552cdb70c36e0e334ed73ef1ed3a490e624e83e2e7ac3ff5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 15135
Filename: batctl-tiny_2019.2-8_mips_mips32.ipk
Size: 15976
SHA256sum: 891a7badcf100ccb711fbd9c8ae0c22e37c8b90e3e150653d2f7cca30c7c0e2d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-0
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 37988
Filename: batmand_1440-0_mips_mips32.ipk
Size: 38657
SHA256sum: 747d3a9d83dcc79d1bf04c1cd03b62e361ea56a34c62be25955d4b2d2919ece5
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 6731
Filename: bird1-ipv4-uci_0.3-1_mips_mips32.ipk
Size: 7703
SHA256sum: daeb12c8b9da23b41a359fbb26c918585a0108e43aea2ea7e2e88390fc740e59
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 207897
Filename: bird1-ipv4_1.6.6-1_mips_mips32.ipk
Size: 208795
SHA256sum: f4cfa60c0bbe365c5d20eba835d9a23f0b29bcb5f8c5df7c0a10611ced33a951
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 5892
Filename: bird1-ipv6-uci_0.3-1_mips_mips32.ipk
Size: 6791
SHA256sum: 7e215c5b639c22c165d6ac1ff31d97512d84474beeafd2843fe2e9c20ff418b0
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 239476
Filename: bird1-ipv6_1.6.6-1_mips_mips32.ipk
Size: 240224
SHA256sum: 30e82d692889ecbc0070d615ed94e34663c27c2c28c43d244aa89b37653cc1db
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8962
Filename: bird1c-ipv4_1.6.6-1_mips_mips32.ipk
Size: 10144
SHA256sum: 25d6161fcab1a1695f18a6542719fec1ffe9114efec2af66903cfc7a4ebad73a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9021
Filename: bird1c-ipv6_1.6.6-1_mips_mips32.ipk
Size: 10209
SHA256sum: 512e936b06027b1421edf1ce26f53955787cb93d9dc4c17858377bc6dcbf11eb
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.6-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8324
Filename: bird1cl-ipv4_1.6.6-1_mips_mips32.ipk
Size: 9439
SHA256sum: 8edccadd46f7f80e6ddcfdf6bf454edab75cf1af061cc24f519c6245e89ad2f1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.6-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8392
Filename: bird1cl-ipv6_1.6.6-1_mips_mips32.ipk
Size: 9506
SHA256sum: 5d3fe7365cff6eb8d2cbdcfe11d7b62eaddf9456b6804bb2b425468252b815ff
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.8-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 326465
Filename: bird2_2.0.8-1_mips_mips32.ipk
Size: 326715
SHA256sum: 4302b9b3ae8c833f4fd98586606b04cc6d0be698a29cc820dc439a88fadebefd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.8-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8800
Filename: bird2c_2.0.8-1_mips_mips32.ipk
Size: 9889
SHA256sum: 969dd9a6b4a5626375eaa708f48bd195f6f26182cf7ebb5b6c21d6fd9dbf1f22
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.8-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7596
Filename: bird2cl_2.0.8-1_mips_mips32.ipk
Size: 8603
SHA256sum: d112cf3ab3d62b0b1dbd48a824b126e855c3f2978a8d980c71d8a21dbaaeb118
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c2
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 6364
Filename: bmx6-json_r2018020902-5_mips_mips32.ipk
Size: 7084
SHA256sum: 800394818c535792f45067c38b2856970addc3feb7e42defa1609e6ae59410e8
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5102
Filename: bmx6-sms_r2018020902-5_mips_mips32.ipk
Size: 5768
SHA256sum: 363570c5b601b18ed3a2ab7123b60ee64cd9cd3733845488350881181ef31d4e
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8581
Filename: bmx6-table_r2018020902-5_mips_mips32.ipk
Size: 9325
SHA256sum: 00a4ec0a26e30fe11a4b6773d47eb2ee80e0d682dc84e596218c6713d4a06c35
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8472
Filename: bmx6-uci-config_r2018020902-5_mips_mips32.ipk
Size: 9257
SHA256sum: 95e24e822508e387d214a4620a5bf15f975db2ccaf668b0514ebb783503a78be
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 145541
Filename: bmx6_r2018020902-5_mips_mips32.ipk
Size: 146192
SHA256sum: fa1c2c44d78c3de81c2a1122c78bebb72fe537cefda0371aea9a729c5a39b218
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: r2019030802-1
Depends: libc, bmx7, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 4054
Filename: bmx7-iwinfo_r2019030802-1_mips_mips32.ipk
Size: 4773
SHA256sum: b3184425f8415a190825081dfa0833c4809f14c2c3d4f09c01d4e1d13b69c787
Description:  link characteristics plugin based on libiwinfo (recommended!)

Package: bmx7-json
Version: r2019030802-1
Depends: libc, bmx7, libjson-c2
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 7897
Filename: bmx7-json_r2019030802-1_mips_mips32.ipk
Size: 8633
SHA256sum: 25c3e7dcfe6f82a7084f30c0228a2f15197b7e353cd081cb08de77412e2c30ed
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5563
Filename: bmx7-sms_r2019030802-1_mips_mips32.ipk
Size: 6263
SHA256sum: f69de0ea78b6fdad961617b2e0ec1c29e8bfdafbd1b3a2bc7354a796fe28a2d6
Description:  sms plugin

Package: bmx7-table
Version: r2019030802-1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9616
Filename: bmx7-table_r2019030802-1_mips_mips32.ipk
Size: 10366
SHA256sum: c8c610eb3df466d89bb5401c1cfe6aec6a2ea88af6b77e66d3dcbe65ea26896e
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5099
Filename: bmx7-topology_r2019030802-1_mips_mips32.ipk
Size: 5782
SHA256sum: 45e43ce0aa695c4f291f2d75e0bdf507b1c7f3dd12b3fa9ae3e1a91db3d11374
Description:  topology plugin

Package: bmx7-tun
Version: r2019030802-1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 25680
Filename: bmx7-tun_r2019030802-1_mips_mips32.ipk
Size: 26334
SHA256sum: e5ce0cbcc2ec668c5f1445e8b30c70548d102d68b3c2d2529a49470f6f6262c9
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2019030802-1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8156
Filename: bmx7-uci-config_r2019030802-1_mips_mips32.ipk
Size: 8961
SHA256sum: 6aed4bf809ecfb24967ea3cb8fbbf37eb14ac0e06db5f5eac643016f53da6c4e
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2019030802-1
Depends: libc, zlib, libmbedtls12, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 176966
Filename: bmx7_r2019030802-1_mips_mips32.ipk
Size: 177532
SHA256sum: ac848801611d5ffb2cfccad3cf309d9ae0f5fad44f84d0e0238d9e46e4dfb54f
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 20.2-1
Depends: libc, libpthread, librt
License: GPL-3.0
Section: net
Architecture: mips_mips32
Installed-Size: 332337
Filename: cjdns-tests_20.2-1_mips_mips32.ipk
Size: 331892
SHA256sum: 4b6e955f1384ab4e539d5cc28a3664223529a3e43643c93dadbe8fd1681b46b1
Description:  cjdns test cases

Package: cjdns
Version: 20.2-1
Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0
Section: net
Architecture: mips_mips32
Installed-Size: 432426
Filename: cjdns_20.2-1_mips_mips32.ipk
Size: 432324
SHA256sum: f363ec93895a4cfa736710991e9a021f0a0719543dfb5ed0c50598d6bae509b6
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 544
Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 1376
SHA256sum: 40c6ff9404c5ae8aaa537d57db2322ad246f891bf9475678d67ca6476e608588
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 94
Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 908
SHA256sum: 6b6c154ea80d5c60c2472da1307b77621f132fa3c5260faa81501180c4a561c2
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 94
Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 888
SHA256sum: 34748e2bd152a9d964066fadfaa58dfbf1a11a265292fe5f02e579e7374f5ca3
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 96325
Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 96904
SHA256sum: 1c00c90682ab88cbdb8bdec6ea46fa927e0cd2628b55de4172d09f6afd243dd8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 106371
Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 106509
SHA256sum: f3e81ad55c8817383bbfeb161f755611fea7495afbb57ab92949a9d74267fcbd
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-1
Depends: libc, bird1-ipv4-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 7416
Filename: luci-app-bird1-ipv4_0.3-1_mips_mips32.ipk
Size: 8187
SHA256sum: aca11bda011340827513c45d56cc5ad492441f45b2c3d1a7848af577a95a5fa0
Description:  bird4 application for LuCI

Package: luci-app-bird1-ipv6
Version: 0.3-1
Depends: libc, bird1-ipv6-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 7461
Filename: luci-app-bird1-ipv6_0.3-1_mips_mips32.ipk
Size: 8230
SHA256sum: d536145406de31ac88397ee3008b93f04fdeabd02c21cf74c351cb4c3389dea6
Description:  bird6 application for LuCI

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 30297
Filename: luci-app-bmx6_6_mips_mips32.ipk
Size: 31091
SHA256sum: 4e98de8992cbc501cc2be5ce4b416e098529fbf623523b586c7623ebf12c6de6
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-cjdns
Version: 1.3-6
Depends: libc, cjdns, luci-base
License: GPL-3.0
Section: luci
Architecture: mips_mips32
Installed-Size: 5365
Filename: luci-app-cjdns_1.3-6_mips_mips32.ipk
Size: 6279
SHA256sum: bdd32c31e75ee03d539e898e1f4fabdd4dbd297361baac0afc70a46596d9f0ab
Description:  This package allows you to configure and inspect cjdns networking using LuCI.
 
 Cjdns implements an encrypted IPv6 network using public-key cryptography
 for address allocation and a distributed hash table for routing.
 This provides near-zero-configuration networking, and prevents many
 of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc
License: GPL-2.0
Section: luci
Architecture: mips_mips32
Installed-Size: 56779
Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 57611
SHA256sum: 76e393bf1fd7d02623edfe1195a805b5397c419030eae20b93ea3f8204869739
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 23280
Filename: luci-lib-dracula_6_mips_mips32.ipk
Size: 23966
SHA256sum: ea1045effb44dc8794261325a65c4f4124cc9e9b4ddc2c5d01aef2bce9384932
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 24818
Filename: luci-lib-jquery-1-4_6_mips_mips32.ipk
Size: 25520
SHA256sum: e756bffafb5c7c5e98ad5e809d5458767e3b021643bbac0f8e94a609e67edd33
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 119746
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_mips_mips32.ipk
Size: 120171
SHA256sum: 1c33789745ba5c97ac946435141809d49640effdf4e27864ea20fa39044234e5
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 6429
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_mips_mips32.ipk
Size: 7467
SHA256sum: 68226088a407e2c9434f41dce1035555c8f4aa7b0b1c46deccd69347ed4ab0b0
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 285149
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_mips_mips32.ipk
Size: 285941
SHA256sum: b8d3770b605fad965f5392b6e18e5eeb228b6ccbac1f167fcc014aa4fb693a93
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, uclibcxx
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 31500
Filename: ndppd_0.2.5-1_mips_mips32.ipk
Size: 32240
SHA256sum: a1451a7d50153390dff8ba4569c79dbdf52302691639110d9a65e8b834628126
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.0.3-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 56728
Filename: nodogsplash_4.0.3-1_mips_mips32.ipk
Size: 57414
SHA256sum: 12466640a226860401f8a034db810b948c5f6b35533cf56c8914f7d86ed215e1
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 12266
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_mips_mips32.ipk
Size: 13063
SHA256sum: 7531e2c8a9d54eb6e83529600fe100dde75ca0b104e6d9018fc2e776b7a194dc
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2005
Filename: olsrd-mod-arprefresh_0.9.7-v0.9.7_mips_mips32.ipk
Size: 2743
SHA256sum: 9d94b519633922c2b2438fe77238921a4623ba5469890b3cf1c2ad80f4aa75eb
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 0.9.7-v0.9.7
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 12224
Filename: olsrd-mod-bmf_0.9.7-v0.9.7_mips_mips32.ipk
Size: 12968
SHA256sum: 2dddad3a5ad1fbd9d46dcb0b534dd91d5cece52951a67fba24103c94a54a3a10
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 3784
Filename: olsrd-mod-dot-draw_0.9.7-v0.9.7_mips_mips32.ipk
Size: 4490
SHA256sum: d63d67ee5e8b36652079cf16583e90dd3a42767e355ea5d0c1fc9039d6499d82
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2373
Filename: olsrd-mod-dyn-gw-plain_0.9.7-v0.9.7_mips_mips32.ipk
Size: 3077
SHA256sum: 050345068b0ae65ed29001538de209da2a9b5641f7dee46283c085f3bc3c869f
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4120
Filename: olsrd-mod-dyn-gw_0.9.7-v0.9.7_mips_mips32.ipk
Size: 4827
SHA256sum: a3dd6c7f5dcc664565b3dcbfb539707fee2cc179bc41cbb44fd10232a9324ac6
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-httpinfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 31070
Filename: olsrd-mod-httpinfo_0.9.7-v0.9.7_mips_mips32.ipk
Size: 31830
SHA256sum: e5aa13822f24d3c388203214fe9f6e832153118b3a2f368d8d2d742a70d89627
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 23434
Filename: olsrd-mod-jsoninfo_0.9.7-v0.9.7_mips_mips32.ipk
Size: 24149
SHA256sum: e90c08334d5d3291719ac48a6847887d84b0779d2146e0ed12ace0bc2cfe408d
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8790
Filename: olsrd-mod-mdns_0.9.7-v0.9.7_mips_mips32.ipk
Size: 9519
SHA256sum: 8b1531422404ef8e06b71ea557c7e97dfbe9a7595d4d1e7cafabb989a56eb863
Description:  MDNS/Zeroconf/Bonjour packet distribution 

Package: olsrd-mod-nameservice
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 11300
Filename: olsrd-mod-nameservice_0.9.7-v0.9.7_mips_mips32.ipk
Size: 12037
SHA256sum: f9590937e8ffe8d877849f880fac0351552951e221c88d584a30a71d16b12612
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 13521
Filename: olsrd-mod-netjson_0.9.7-v0.9.7_mips_mips32.ipk
Size: 14229
SHA256sum: f3a27d8b8aea06961d36a4e415ad8da1a1698822d9a54ad80d017940bc7c7dd4
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8534
Filename: olsrd-mod-p2pd_0.9.7-v0.9.7_mips_mips32.ipk
Size: 9258
SHA256sum: 8387f1e552602d21c2cb20d351090d78f3db14b41e6094814a5021ac9cbd91f1
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2956
Filename: olsrd-mod-pgraph_0.9.7-v0.9.7_mips_mips32.ipk
Size: 3666
SHA256sum: c438b1eec3b1520084c5ff2acf9800ce0993c26e8937cae9b0bffe90e65ce812
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 0.9.7-v0.9.7
Depends: libc, olsrd, libgps
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 62334
Filename: olsrd-mod-pud_0.9.7-v0.9.7_mips_mips32.ipk
Size: 62873
SHA256sum: 1619d86692255016270b379bf539815c48a08f0f4ae8019bf08e6e2d15ca7b1b
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6225
Filename: olsrd-mod-quagga_0.9.7-v0.9.7_mips_mips32.ipk
Size: 6931
SHA256sum: 74fdefcad57f2c52e80470479fa6594e8a62df22fc6c8fe2bff0522ab6e750b6
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 10329
Filename: olsrd-mod-secure_0.9.7-v0.9.7_mips_mips32.ipk
Size: 11118
SHA256sum: e897c4ec5454d6244fd68ce6e68351845a0b4429318630c5c42175acaf6db1d5
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4472
Filename: olsrd-mod-sgwdynspeed_0.9.7-v0.9.7_mips_mips32.ipk
Size: 5240
SHA256sum: 672e14e0e1e35a60654161cd299b09a1b17cb35488560e79e501c90845043f1a
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 15224
Filename: olsrd-mod-txtinfo_0.9.7-v0.9.7_mips_mips32.ipk
Size: 15929
SHA256sum: 5ed8cbb1806ed6e661c883c2c874a0ac5914621286beec17924cb44d69c030e4
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1711
Filename: olsrd-mod-watchdog_0.9.7-v0.9.7_mips_mips32.ipk
Size: 2412
SHA256sum: 99063c7bdfacdc57c87a1e4403140dc0efff3fad9218f6771515a1245b755d6a
Description:  Watchdog plugin

Package: olsrd
Version: 0.9.7-v0.9.7
Depends: libc, libpthread
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 138655
Filename: olsrd_0.9.7-v0.9.7_mips_mips32.ipk
Size: 139281
SHA256sum: c8399660fe9cb6d783f172143d3b5671c62bf169ea06f7289e3b88ee68552381
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 101722
Filename: oonf-dlep-proxy_0.14.1-1_mips_mips32.ipk
Size: 102261
SHA256sum: aa9a759eb3859298d496afb13311b6c8c00a196a022378f239bc07a5ff730202
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 98341
Filename: oonf-dlep-radio_0.14.1-1_mips_mips32.ipk
Size: 98892
SHA256sum: fcb49dbed2f6264f64ee4330b4c9e8715323f4b2cba4d06997947dd91c124c53
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1382
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2092
SHA256sum: f09d8488cf65b4d4bcc10a74b0afed84ca0b5b86f0e1f81d8724cbb96fa4dccd
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 163955
Filename: oonf-olsrd2_0.14.1-1_mips_mips32.ipk
Size: 164524
SHA256sum: ac638c48eabb5430ef66c09cab8f7f0d1856cb089e62e5c06b8a804cc1abd27c
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 5.2.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash, nodogsplash2
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 82215
Filename: opennds_5.2.0-1_mips_mips32.ipk
Size: 82800
SHA256sum: 0fb4a43b54491e68777d6963d4fa14e66642e9ca8733d5c825d2e1e1ea977199
Description:  openNDS is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78926
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_mips_mips32.ipk
Size: 79709
SHA256sum: 2cdc9f0c1e24615f551caa29083faa1e55b499c535468ccddeb49c93aadab063
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c2, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 28465
Filename: prince_v0.4-1_mips_mips32.ipk
Size: 29355
SHA256sum: 8f3dd42dcca26685c410100710d70c30f595d7c04bff2e77eb745d0d2a36866c
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 196416
Filename: quagga-bgpd_1.1.1-1_mips_mips32.ipk
Size: 194683
SHA256sum: 077e30d8e49ac07e29d0de5bc8e53871ed1d0d18070b244e936806393de37ef2
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 90473
Filename: quagga-isisd_1.1.1-1_mips_mips32.ipk
Size: 90316
SHA256sum: 7e4d28d132237f90f35ea12769bfb066f51b75cd97d723519ddd75cc326b60cb
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 181067
Filename: quagga-libospf_1.1.1-1_mips_mips32.ipk
Size: 180606
SHA256sum: 64e691ed9aa0093e6e61632a01dff526036e59e9da798ee03160ac93be98284b
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.1-1
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 128723
Filename: quagga-libzebra_1.1.1-1_mips_mips32.ipk
Size: 127874
SHA256sum: c4b863a990cdcb160dd71fafcf2e9112b0558cc538d4cdd8ecd0e842fb864c40
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 84387
Filename: quagga-ospf6d_1.1.1-1_mips_mips32.ipk
Size: 84506
SHA256sum: 13cccd95c9edbce2390c14845dbecd0dee759a399bde0f525453f6d4e0040ee0
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 3755
Filename: quagga-ospfd_1.1.1-1_mips_mips32.ipk
Size: 4525
SHA256sum: 0537cab78c3e2bbd7565995250c769efd959d11f9c5f31d4b0ab3b9a20cf66de
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 35323
Filename: quagga-ripd_1.1.1-1_mips_mips32.ipk
Size: 35436
SHA256sum: 910ff850b2cc2dee2f309da3be522c021c7d310a4478a18ce3f5ea0cd443297e
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 29436
Filename: quagga-ripngd_1.1.1-1_mips_mips32.ipk
Size: 29653
SHA256sum: c7f5a496c01ed67f75f186881adb305d92f478ffef08cc0adc152791b4246a50
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 124953
Filename: quagga-vtysh_1.1.1-1_mips_mips32.ipk
Size: 125045
SHA256sum: db7146a878ab0d25eb3351a732ddca2f004be0c1c889aaa1444192bcdf196625
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 11468
Filename: quagga-watchquagga_1.1.1-1_mips_mips32.ipk
Size: 12184
SHA256sum: d997f5a2c93e5b5c4aff681e59147ba6fb19056fd1338655bb3285928464ca97
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 87789
Filename: quagga-zebra_1.1.1-1_mips_mips32.ipk
Size: 87324
SHA256sum: 0b52ea658c80df697e17ec1b0a777c115ffa2fd3cfab3178389d93bb39a0a246
Description:  Zebra daemon

Package: quagga
Version: 1.1.1-1
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 2379
Filename: quagga_1.1.1-1_mips_mips32.ipk
Size: 3189
SHA256sum: d3bc87e950adcd96170783ddf54a222784c5e6e5320de4880cf43c9d22e6b58b
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-0
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 10075
Filename: vis_1440-0_mips_mips32.ipk
Size: 10836
SHA256sum: a34596d770aef7277d0bc807d42163cddc79c19ac359cb71e0f50e31110a3f0e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 10017
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_mips_mips32.ipk
Size: 10832
SHA256sum: 69970ec6295180d0f118c0d23373144bc627801c1414fe96c94d20956acff3c7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.