Package: ahcpd Version: 0.53-3 Depends: libc, ip, librt License: MIT Section: net Architecture: arm_arm926ej-s Installed-Size: 21454 Filename: ahcpd_0.53-3_arm_arm926ej-s.ipk Size: 22284 SHA256sum: ccfc9c555bb87b4843b7765b525b1c4b0c404ef1111310fb96d0cbb590c00292 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2019.2-3 Depends: libc, libnl-tiny, librt License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 24954 Filename: alfred_2019.2-3_arm_arm926ej-s.ipk Size: 26079 SHA256sum: 0f1751f7c42b93e5555c5f5c96b44555c9dbebd33a87a529279be9bb9867d6c9 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-1 Depends: libc, librt Section: net Architecture: arm_arm926ej-s Installed-Size: 3825 Filename: babel-pinger_0.1-1_arm_arm926ej-s.ipk Size: 4592 SHA256sum: 85eafb4fc2c7e055d7e826c46f5a1da6530622145d4f307901de94c2c241269f Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.9.2-1 Depends: libc License: MIT Section: net Architecture: arm_arm926ej-s Installed-Size: 55228 Filename: babeld_1.9.2-1_arm_arm926ej-s.ipk Size: 56311 SHA256sum: 7b77d65cc9feded5f79139465975d992525bda4709a7d4dcb598e6760a98345f Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is in the process of becoming an IETF Standard. Package: batctl-default Version: 2019.2-8 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 41527 Filename: batctl-default_2019.2-8_arm_arm926ej-s.ipk Size: 42450 SHA256sum: a3ad65dac848d4a2130782398cf5dd0e4f470030a486d8b813aead8ae647be05 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2019.2-8 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 48610 Filename: batctl-full_2019.2-8_arm_arm926ej-s.ipk Size: 49516 SHA256sum: 1cbf371d35ea1b0333dc232eab82b9e7cba21ad6576c656c67a4d065be0eca02 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2019.2-8 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 15165 Filename: batctl-tiny_2019.2-8_arm_arm926ej-s.ipk Size: 16057 SHA256sum: a225bb9952da364a241c32f64b636e5fcc94b3fa3848e9a6677bfd54f1f1033f Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-0 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 39168 Filename: batmand_1440-0_arm_arm926ej-s.ipk Size: 40016 SHA256sum: 1981b2fca6d99e4322f94d3d5f08d592e5a7c530404fb11da68ead6ec861683d Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird1-ipv4-uci Version: 0.3-1 Depends: libc, bird1-ipv4, libuci20130104, uci License: GPL-3.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 6732 Filename: bird1-ipv4-uci_0.3-1_arm_arm926ej-s.ipk Size: 7708 SHA256sum: 54a232f42ede8cf5ab85b339336ac4091433668f0960c03c5879e40e0cc0b25b Description: bird1-ipv4 UCI integration module Package: bird1-ipv4 Version: 1.6.6-1 Depends: libc, libpthread Conflicts: bird4 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 199241 Filename: bird1-ipv4_1.6.6-1_arm_arm926ej-s.ipk Size: 200403 SHA256sum: 78bce5ce32768e3311f8f7386a5147e79509e16068293a03c750a23047047199 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. Package: bird1-ipv6-uci Version: 0.3-1 Depends: libc, bird1-ipv6, libuci20130104, uci License: GPL-3.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 5896 Filename: bird1-ipv6-uci_0.3-1_arm_arm926ej-s.ipk Size: 6804 SHA256sum: 90d773b56046ce7e171eba3986c84b5452f6e5b2e94664fe0cf35b76e5d4345f Description: bird1-ipv6 UCI integration module Package: bird1-ipv6 Version: 1.6.6-1 Depends: libc, libpthread Conflicts: bird6 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 229105 Filename: bird1-ipv6_1.6.6-1_arm_arm926ej-s.ipk Size: 230112 SHA256sum: 80983ee366d803cd421f98609a75b25fdf5c16ec253e2870044267369adc30f0 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. Package: bird1c-ipv4 Version: 1.6.6-1 Depends: libc, libreadline8, libncurses6, bird1-ipv4 Conflicts: birdc4 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8620 Filename: bird1c-ipv4_1.6.6-1_arm_arm926ej-s.ipk Size: 9801 SHA256sum: 51ba22db2651d2e4fc9ec0f2b3d3995ff8e93e3f7c9db971b9b7d58459725565 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird1c-ipv6 Version: 1.6.6-1 Depends: libc, libreadline8, libncurses6, bird1-ipv6 Conflicts: birdc6 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8691 Filename: bird1c-ipv6_1.6.6-1_arm_arm926ej-s.ipk Size: 9826 SHA256sum: a98cd4643d8b3613997ed3b728f297e6aedb0ae6fd1c867dc9f116333f4a281d Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird1cl-ipv4 Version: 1.6.6-1 Depends: libc, bird1-ipv4 Conflicts: birdcl4 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 7938 Filename: bird1cl-ipv4_1.6.6-1_arm_arm926ej-s.ipk Size: 9062 SHA256sum: 42576b032740181ce1579b607cc88e7099621be640a7ad47c0f0c9306df4f174 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bird1cl-ipv6 Version: 1.6.6-1 Depends: libc, bird1-ipv6 Conflicts: birdcl6 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8003 Filename: bird1cl-ipv6_1.6.6-1_arm_arm926ej-s.ipk Size: 9127 SHA256sum: a5d016dfb46af6556d793e35b9afaec6eddcf8926552970e12f05523e0309f32 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bird2 Version: 2.0.8-1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 319290 Filename: bird2_2.0.8-1_arm_arm926ej-s.ipk Size: 319954 SHA256sum: 07569ba8897e507e00817aff3aa363bddcca8341fed4f3b79a5edf71f594d981 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.0.8-1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 8575 Filename: bird2c_2.0.8-1_arm_arm926ej-s.ipk Size: 9659 SHA256sum: 6a0205cab943a93f23917b318484dc332b7959e9a0110c856f52f33da9b4ef3a Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.0.8-1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 7298 Filename: bird2cl_2.0.8-1_arm_arm926ej-s.ipk Size: 8324 SHA256sum: ea1dd3d37689a4b2b684ef4642331588bee59b9d891c3404dc52a6daa567f967 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx6-json Version: r2018020902-5 Depends: libc, bmx6, libjson-c2 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 6325 Filename: bmx6-json_r2018020902-5_arm_arm926ej-s.ipk Size: 7041 SHA256sum: dc151d8571928dc5d7051b2b04ca9e7a6caa95cd651b68a8e7069bb52f3745c2 Description: json plugin based on json-c Package: bmx6-sms Version: r2018020902-5 Depends: libc, bmx6 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 4855 Filename: bmx6-sms_r2018020902-5_arm_arm926ej-s.ipk Size: 5537 SHA256sum: 5274e228fd97bcb41abe1f7808bd053be33a63c9e52d92ba9aee25a3af788589 Description: sms plugin Package: bmx6-table Version: r2018020902-5 Depends: libc, bmx6 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8377 Filename: bmx6-table_r2018020902-5_arm_arm926ej-s.ipk Size: 9118 SHA256sum: 3fec2c1b8c790094a1e0043a367933b8cfeb82d7f64a782b492c5c753939afb7 Description: bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels Package: bmx6-uci-config Version: r2018020902-5 Depends: libc, bmx6, libuci20130104 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8320 Filename: bmx6-uci-config_r2018020902-5_arm_arm926ej-s.ipk Size: 9123 SHA256sum: da77e279bd579d242b5c08ae62d80b120bb3da0286ca2153a4b03291c45cd6d5 Description: configuration plugin based on uci (recommended!) Package: bmx6 Version: r2018020902-5 Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 142174 Filename: bmx6_r2018020902-5_arm_arm926ej-s.ipk Size: 142862 SHA256sum: 93aaa48fce7e0ee1f6f4522b3cece9d199ead3df08f52642d6ca97152b7f56fa Description: BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6 Package: bmx7-iwinfo Version: r2019030802-1 Depends: libc, bmx7, libiwinfo20181126 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 4028 Filename: bmx7-iwinfo_r2019030802-1_arm_arm926ej-s.ipk Size: 4763 SHA256sum: c5bd7adf8f2c5e8c240554b9e280cd4516e4ee1c0dea6bc1b2830991d16b9a8e Description: link characteristics plugin based on libiwinfo (recommended!) Package: bmx7-json Version: r2019030802-1 Depends: libc, bmx7, libjson-c2 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 7520 Filename: bmx7-json_r2019030802-1_arm_arm926ej-s.ipk Size: 8291 SHA256sum: 75547566d073afe39a36f8ca1d1b3f1f5f4d9a49f137188dc0d9280181ce2a9b Description: json plugin based on json-c Package: bmx7-sms Version: r2019030802-1 Depends: libc, bmx7 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 5346 Filename: bmx7-sms_r2019030802-1_arm_arm926ej-s.ipk Size: 6057 SHA256sum: 89d352d6ec7e28986ede5a0abfb4d8df1b009a81c39ea3752b194c4a0bbd411d Description: sms plugin Package: bmx7-table Version: r2019030802-1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 9370 Filename: bmx7-table_r2019030802-1_arm_arm926ej-s.ipk Size: 10117 SHA256sum: d2e7e9aef37e08c41c436c5c27cd18be78bb38996bf8332a79718fc405125e1f Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2019030802-1 Depends: libc, bmx7 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 5025 Filename: bmx7-topology_r2019030802-1_arm_arm926ej-s.ipk Size: 5714 SHA256sum: 5e6934f0745615c220f2056347c67a538c4c1c56000c53dad5d14e1a26532753 Description: topology plugin Package: bmx7-tun Version: r2019030802-1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 25660 Filename: bmx7-tun_r2019030802-1_arm_arm926ej-s.ipk Size: 26388 SHA256sum: 9fa826d8fed401ce2077a4e1d8e79ae997a3089172bedbd2dabeb5e9c106f90e Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2019030802-1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 8023 Filename: bmx7-uci-config_r2019030802-1_arm_arm926ej-s.ipk Size: 8833 SHA256sum: fbabf9eb6ef69ed0bb35158c49ad301700a081336ea7652358957e2a8750ba38 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2019030802-1 Depends: libc, zlib, libmbedtls12, libiwinfo20181126 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 172338 Filename: bmx7_r2019030802-1_arm_arm926ej-s.ipk Size: 173191 SHA256sum: 8fe4fb2e6e085e3e61d336ee4c1cc7eef935c936f395b06a9bc643aaeb7633d2 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 20.2-1 Depends: libc, libpthread, librt License: GPL-3.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 301434 Filename: cjdns-tests_20.2-1_arm_arm926ej-s.ipk Size: 301224 SHA256sum: 1aacbc8211c50274848bb8e55fce830909d6957a5582266fc581ee20a4457628 Description: cjdns test cases Package: cjdns Version: 20.2-1 Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 382894 Filename: cjdns_20.2-1_arm_arm926ej-s.ipk Size: 383042 SHA256sum: 19af559ada1e727672721ac006928e3d730b29241064bf3fc32ded09140d326d Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 545 Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 1377 SHA256sum: 369b1ce3f8211b258520cc72eb086e236a722593f6782cd094b7005be0cfcb9d Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 96 Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 908 SHA256sum: 922e5009e657a83e9116021a12643796897f6d43b92efd70ba0633ca72b9b1ac Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 96 Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 897 SHA256sum: b31acdda84cad012e1128b0db43b5fc7cef873742f2015d90a0ed3653934ae71 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 95254 Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 96113 SHA256sum: 397f00691cb30231ad216699bb6ab93d48afbcd8066bbd7e705ab8cdc8bd260c Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 104935 Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 105862 SHA256sum: f9fbc3c04ea4c3ba832e77ded0ed6b7075a608e9692e73d0f154696deb1f3f78 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-bird1-ipv4 Version: 0.3-1 Depends: libc, bird1-ipv4-uci, luci-base License: GPL-3.0+ Section: luci Architecture: arm_arm926ej-s Installed-Size: 7416 Filename: luci-app-bird1-ipv4_0.3-1_arm_arm926ej-s.ipk Size: 8198 SHA256sum: b9a620fa0f23c747f223c1d2665a89eed6d5316ca5ce17f02004481ef7d7a5a8 Description: bird4 application for LuCI Package: luci-app-bird1-ipv6 Version: 0.3-1 Depends: libc, bird1-ipv6-uci, luci-base License: GPL-3.0+ Section: luci Architecture: arm_arm926ej-s Installed-Size: 7459 Filename: luci-app-bird1-ipv6_0.3-1_arm_arm926ej-s.ipk Size: 8232 SHA256sum: aebd685007163874dcc9a2b981978ecff54bd0914d9fd6a0023d87963ef9d1f0 Description: bird6 application for LuCI Package: luci-app-bmx6 Version: 6 Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula License: GPL-2.0+ Section: luci Architecture: arm_arm926ej-s Installed-Size: 30305 Filename: luci-app-bmx6_6_arm_arm926ej-s.ipk Size: 31102 SHA256sum: f695be2250a5db9a8c0520b9a093c2a623ebfc93bceedbfae23d5034d85a6aba Description: bmx6 web application (status and configuration) for LuCi web interface Package: luci-app-cjdns Version: 1.3-6 Depends: libc, cjdns, luci-base License: GPL-3.0 Section: luci Architecture: arm_arm926ej-s Installed-Size: 5366 Filename: luci-app-cjdns_1.3-6_arm_arm926ej-s.ipk Size: 6280 SHA256sum: cfb83e6c2adbbd5fd864a12b2934f186ca93042fe5c4eb798ff78d9555c51e17 Description: This package allows you to configure and inspect cjdns networking using LuCI. Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2 Depends: libc License: GPL-2.0 Section: luci Architecture: arm_arm926ej-s Installed-Size: 56777 Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk Size: 57607 SHA256sum: c99730ab27c357da8db74de4f32544ea161571d419f4a052ba501b5de2531113 Description: HNCP Homenet configuration and visualization Package: luci-lib-dracula Version: 6 Depends: libc License: GPL-2.0+ Section: luci Architecture: arm_arm926ej-s Installed-Size: 23282 Filename: luci-lib-dracula_6_arm_arm926ej-s.ipk Size: 23972 SHA256sum: 2cbdf56ca23ea06151012ee89bff48ce9fbf64a12414f955c0a56238ab267559 Description: dracula graph javascript library Package: luci-lib-jquery-1-4 Version: 6 Depends: libc License: GPL-2.0+ Section: luci Architecture: arm_arm926ej-s Installed-Size: 24817 Filename: luci-lib-jquery-1-4_6_arm_arm926ej-s.ipk Size: 25530 SHA256sum: 4cfe2fe4f703c742e0453cd6bf6f9917ae57cba6f74e272e72ada430944df7aa Description: minified javascript jQuery 1.4 library Package: mcproxy Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 116887 Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_arm_arm926ej-s.ipk Size: 117834 SHA256sum: dd03dbe4b845e7090d5c2b1fb96e3d46ba3c67b240ff0bf1cff8578f100870fa Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: minimalist-pcproxy Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1 Depends: libc, libubox20191228 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 6068 Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_arm_arm926ej-s.ipk Size: 7080 SHA256sum: a8c7921680f33bab84f1bd33aa09f17cfa3e3f8aaa11e33e38af5d0b16d18725 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: mrd6 Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2 Depends: libc, libstdcpp6 License: GPL-2.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 260433 Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_arm_arm926ej-s.ipk Size: 261234 SHA256sum: ee085b43e423af42b25cefa77cd6b976b965a117f9e5e46374a4ac8c4c77b721 Description: Multicast is becoming a major component in next generation networks, used in several scenarios, from video broadcasting to multimedia conferencing. In order to be implemented, new technology needs supporting hardware and software across a set of devices and systems. MRD6 is an implementation of a modular IPv6 Multicast Routing Framework for the Linux operating system and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support. Package: ndppd Version: 0.2.5-1 Depends: libc, uclibcxx License: GPL-3.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 30701 Filename: ndppd_0.2.5-1_arm_arm926ej-s.ipk Size: 31578 SHA256sum: c136b6f0c6738ddfb5788172a7dc645bd7e21df9711f0552e9854b58c88117a6 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 4.0.3-1 Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl Conflicts: nodogsplash2 License: GPL-2.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 58985 Filename: nodogsplash_4.0.3-1_arm_arm926ej-s.ipk Size: 59941 SHA256sum: 003e4e387abf642a5262effc2989f34cc9aceb46bc17c79e3f50cc768f1e9d8b Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. It also incorporates an API that allows the creation of sophisticated authentication applications. Package: ohybridproxy Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1 Depends: libc, libubox20191228, mdnsd License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 11759 Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_arm926ej-s.ipk Size: 12613 SHA256sum: e19739eff32703733cabaab37576b30f10da8cd7cc645cd15d643a5327bb5b91 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 1858 Filename: olsrd-mod-arprefresh_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 2608 SHA256sum: f66ba3ee74ff6a9a05e8a09b504e60b99ee6fa779a8b80deae635cb76bd1e250 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 0.9.7-v0.9.7 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 11897 Filename: olsrd-mod-bmf_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 12651 SHA256sum: 5bf79ac49d0915e96c64b3ad21ff057e2fff9dc54e8615d5322ef7014dac2745 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 3678 Filename: olsrd-mod-dot-draw_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 4395 SHA256sum: 5a802992c5551fabf30cf918e0c58cdfc39b01912f7620f43d5151292ee489c9 Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 2189 Filename: olsrd-mod-dyn-gw-plain_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 2942 SHA256sum: 0877b414f8a82279b58eac176bef3f20409b0417e74df4d9dc213db5367b5c8a Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 3819 Filename: olsrd-mod-dyn-gw_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 4527 SHA256sum: 7dea25fde24b583967086af521c5a2affccd853f8618f2f1771086a8f29dd015 Description: Dynamic internet gateway plugin Package: olsrd-mod-httpinfo Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 32378 Filename: olsrd-mod-httpinfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 33193 SHA256sum: 333377f568a36254d546f74be19c02298010c6cb7ee814d59cea38bf5e5e0b97 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 24242 Filename: olsrd-mod-jsoninfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 24868 SHA256sum: 1b8d816de5b9278c82eb26055515c40ade3731338ccd0521aa956dcdf113381b Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 8764 Filename: olsrd-mod-mdns_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 9519 SHA256sum: 77fd0f10c34b6b7f4c12e843829c239b0c4d6e7d9c68b8020a2e6bb1009e1d53 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 10724 Filename: olsrd-mod-nameservice_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 11468 SHA256sum: 8ebaed17a7edeffde84894812df415e253e3ab7d1f0389a1fceb34a728812858 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 13440 Filename: olsrd-mod-netjson_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 14132 SHA256sum: bbf2919de88b46d44a36d1f2ccb699bcf3cc03e1fabd7ea0471ac54a2fdc57a0 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 8032 Filename: olsrd-mod-p2pd_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 8805 SHA256sum: b94cfc38a98446a4dccce1202214bdb723a1b1a7f526b515c68d17cc78ed2602 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 2756 Filename: olsrd-mod-pgraph_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 3477 SHA256sum: 9310a9824ccf538a043d2abaf231d37a3312f60b94742b5033ed723f55fd68ad Description: output network topology for pgraph Package: olsrd-mod-pud Version: 0.9.7-v0.9.7 Depends: libc, olsrd, libgps License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 61312 Filename: olsrd-mod-pud_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 61897 SHA256sum: 309070b4d128cefbd60a2569bc29a06b77b9e7fd4b135d5aad55cf7d502b7450 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 5911 Filename: olsrd-mod-quagga_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 6626 SHA256sum: a440cd2c90756dcd8ed02f6caa1c62df57a09308b2c9b8c9fb6be592dc106a45 Description: Quagga plugin Package: olsrd-mod-secure Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 10130 Filename: olsrd-mod-secure_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 10916 SHA256sum: 0466b6743ccf1edd595d8a6db72a63944e93947e20d2f893baa7a2af49ec2733 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 4164 Filename: olsrd-mod-sgwdynspeed_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 4928 SHA256sum: 9b394d7c4bacdc81a5bf0d3d41a862f854b57aa6a4952567e3e90cd2fca46e10 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 15134 Filename: olsrd-mod-txtinfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 15843 SHA256sum: 49a971fa065d3d124d60cad0f20987273e61a2483b3e76b45d5471e66b87c115 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 0.9.7-v0.9.7 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 1504 Filename: olsrd-mod-watchdog_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 2232 SHA256sum: bc2ae5f4ae9ebfc010172bae58ac31a8df46b313f650d158cc4caa15dc1f0f11 Description: Watchdog plugin Package: olsrd Version: 0.9.7-v0.9.7 Depends: libc, libpthread License: BSD-3-Clause Section: net Architecture: arm_arm926ej-s Installed-Size: 139345 Filename: olsrd_0.9.7-v0.9.7_arm_arm926ej-s.ipk Size: 140106 SHA256sum: db16c22dd51e05d7e196dcba86f13fe233745ac0a74892dae541105ce8bdcf52 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Section: net Architecture: arm_arm926ej-s Installed-Size: 100166 Filename: oonf-dlep-proxy_0.14.1-1_arm_arm926ej-s.ipk Size: 101026 SHA256sum: 8eafb37eabfcb9e01cad2a5b3e20e86b34ebf5fc7021724a3c3d917d21e18459 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Section: net Architecture: arm_arm926ej-s Installed-Size: 96716 Filename: oonf-dlep-radio_0.14.1-1_arm_arm926ej-s.ipk Size: 97395 SHA256sum: 74b93fe1954f83f72413ca74b484c8a10df15e37dd070f134e8e253dfef6c360 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net Architecture: arm_arm926ej-s Installed-Size: 1386 Filename: oonf-init-scripts_0.9.1-r3_arm_arm926ej-s.ipk Size: 2102 SHA256sum: 44252b48e340419b3c443f68b40a6591a6b646af347b521eee520734d9e05eb3 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Section: net Architecture: arm_arm926ej-s Installed-Size: 161330 Filename: oonf-olsrd2_0.14.1-1_arm_arm926ej-s.ipk Size: 162126 SHA256sum: d8022fcefe81f6c716e6661df3692aa3f4cd743e4cdb6e58f14355f080aed19e Description: Build Olsrd V2 Routing Agent Package: opennds Version: 5.2.0-1 Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl Conflicts: nodogsplash, nodogsplash2 License: GPL-2.0+ Section: net Architecture: arm_arm926ej-s Installed-Size: 84767 Filename: opennds_5.2.0-1_arm_arm926ej-s.ipk Size: 85618 SHA256sum: 3767568a20d92998dc396768f1b6e12b5702193009baaa57eec71ac5d0ad9340 Description: openNDS is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. It also incorporates an API that allows the creation of sophisticated authentication applications. Package: pimbd Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1 Depends: libc, netifd License: Apache-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 82902 Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_arm_arm926ej-s.ipk Size: 83774 SHA256sum: ca4d54dc5853e8fb8af5955b29cb09442786540a608be457f8e9e0d5ba01a331 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: v0.4-1 Depends: libc, libjson-c2, libpthread License: MIT Section: net Architecture: arm_arm926ej-s Installed-Size: 27008 Filename: prince_v0.4-1_arm_arm926ej-s.ipk Size: 27927 SHA256sum: eb37c15e2c9bb3297e7cfaa6c3b2c7a529cff03a28cf9934e333657302ef4fe9 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: quagga-bgpd Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 200621 Filename: quagga-bgpd_1.1.1-1_arm_arm926ej-s.ipk Size: 200868 SHA256sum: bbc65aecbbeeae4fc287f39966b208a58cc8663ac06f91688400ce1629eb8442 Description: BGPv4, BGPv4+, BGPv4- routing engine Package: quagga-isisd Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 92667 Filename: quagga-isisd_1.1.1-1_arm_arm926ej-s.ipk Size: 93307 SHA256sum: 64950c80f39d45afc65241ecac94870b219318305f3c2fab4d9cb07929bf7ebc Description: IS-IS routing engine Package: quagga-libospf Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 193629 Filename: quagga-libospf_1.1.1-1_arm_arm926ej-s.ipk Size: 192667 SHA256sum: 7c63334ef860469fecf143a70b1aa69625a06d34bb7cdcf8b61fbaab6f2fc4b7 Description: OSPF library Package: quagga-libzebra Version: 1.1.1-1 Depends: libc, quagga License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 130730 Filename: quagga-libzebra_1.1.1-1_arm_arm926ej-s.ipk Size: 129874 SHA256sum: 5204ed05e7cbfcda28a0c20fa8ad07f1c5405b9c4b025cbca97ace33f33fa795 Description: zebra library Package: quagga-ospf6d Version: 1.1.1-1 Depends: libc, quagga, quagga-libospf License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 89185 Filename: quagga-ospf6d_1.1.1-1_arm_arm926ej-s.ipk Size: 89805 SHA256sum: 588553c8fb82639b22330abeaba744c73f2a1df3c09762a11ec62118b122354d Description: OSPFv3 routing engine Package: quagga-ospfd Version: 1.1.1-1 Depends: libc, quagga, quagga-libospf License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 3593 Filename: quagga-ospfd_1.1.1-1_arm_arm926ej-s.ipk Size: 4367 SHA256sum: f5c8b019e7b84d811c676fb51afe0b1b5943ddaa4fb1f5f984b994787d1610b8 Description: OSPFv2 routing engine Package: quagga-ripd Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 36519 Filename: quagga-ripd_1.1.1-1_arm_arm926ej-s.ipk Size: 37242 SHA256sum: f7d5b958666a8346a3e77a9c2062ee1b9210cdcd50696a7653c0e992e1f7c85e Description: RIP routing engine Package: quagga-ripngd Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 29840 Filename: quagga-ripngd_1.1.1-1_arm_arm926ej-s.ipk Size: 30482 SHA256sum: 36859b4074fc433a7a0e09ba1b8192a1f614e29a600f036fd5bd1584dc9d7921 Description: RIPNG routing engine Package: quagga-vtysh Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6 License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 118379 Filename: quagga-vtysh_1.1.1-1_arm_arm926ej-s.ipk Size: 118498 SHA256sum: b30ae3e5e7b4f39e152e17e576e80ecb38692f9ef66a33c9a6df634493c98b23 Description: integrated shell for Quagga routing software Package: quagga-watchquagga Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 11456 Filename: quagga-watchquagga_1.1.1-1_arm_arm926ej-s.ipk Size: 12229 SHA256sum: 4b1b96b65ea1a74dc73991c97053d64db3b102d3a2e71af12e9b00c77457512d Description: Quagga watchdog Package: quagga-zebra Version: 1.1.1-1 Depends: libc, quagga, quagga-libzebra License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 89565 Filename: quagga-zebra_1.1.1-1_arm_arm926ej-s.ipk Size: 90022 SHA256sum: 452cf0ca562f2bf3870e19c96b2dcad9ab0dc72e76091f633553359bb953bd7e Description: Zebra daemon Package: quagga Version: 1.1.1-1 Depends: libc, librt License: GPL-2.0-or-later Section: net Architecture: arm_arm926ej-s Installed-Size: 2380 Filename: quagga_1.1.1-1_arm_arm926ej-s.ipk Size: 3197 SHA256sum: d2c841df274856c1fe6374437972b84d828797bf71009ef5a875f42872244834 Description: A routing software package that provides TCP/IP based routing services with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2, OSPFv3, BGP-4, and BGP-4+ Package: vis Version: 1440-0 Depends: libc, libpthread License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 10027 Filename: vis_1440-0_arm_arm926ej-s.ipk Size: 10821 SHA256sum: 2cd92178e238f98b1d2e763db1ea601c02d1258de9528f524d11c336f0946c10 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1 Depends: libc, libubox20191228 License: GPL-2.0 Section: net Architecture: arm_arm926ej-s Installed-Size: 9598 Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_arm926ej-s.ipk Size: 10360 SHA256sum: 3babe3fe2342781de1193bfbb3af85854cfa1898d84b7dfcc52c98b8b7950721 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.